http://www.greencarreports.com/news/1100526_how-to-wire-a-new-garage-for-electric-car-charging-what-you-need-to-know
How To Wire A New Garage For Electric-Car Charging: What You Need To Know
Feb 26, 2016  John Voelcker

[images  
http://images.hgmsites.net/lrg/garage_100546966_l.jpg
Garage

http://images.hgmsites.net/lrg/nema-6-50-plug_100546965_l.jpg
NEMA 6-50 plug

http://images.hgmsites.net/lrg/nema-6-50-socket_100546964_l.jpg
NEMA 6-50 socket

http://images.hgmsites.net/lrg/nema-6-50-plug-in-socket_100546961_l.jpg
NEMA 6-50 plug in socket

http://images.hgmsites.net/lrg/circuit-breaker-box_100546962_l.jpg
Circuit-breaker box

http://images.hgmsites.net/lrg/circuit-breaker-box-showing-240-volt-circuit-for-electric-car-charging-station_100546963_l.jpg
Circuit-breaker box showing 240-Volt circuit for electric-car charging
station
]
  
One of the more daunting perceived obstacles to driving a plug-in electric
car seems to be the need for a home charging station.

While plug-in hybrids can be recharged overnight using their 120-Volt
charging cords, battery-electric drivers should really have access to a
240-Volt Level 2 charging station.

Those will recharge the full battery pack in anything from 4 to 9 hours,
depending on the specific car.

Many owners will want to retrofit a charging station into an existing
garage, but to lay out the principles, we're starting with what it takes to
install one into a garage that's being built or extensively remodeled.

We've just gone through that process for a new garage in New York's Catskill
Mountains. (Note this applies only to North America!)

There are several steps, but it's important to understand that the wiring is
the first step, and separate from the charging station--since drivers may
later choose to upgrade to a more powerful station.

First, work with your contractor and electrician to install a dedicated
240-Volt line to 1 or 2 feet below wherever you plan to locate your charging
station.

We sited ours in a corner of the building so a car can be recharged inside,
or we can run the cord out underneath the garage door or through the regular
door on the side of the building.

Many contractors won't have any prior experience with electric-car charging
stations, so you may have to educate them.

The easiest way to put it in context is that it's the same kind of circuit
used for electric clothes driers or stoves.

Second, make sure your new circuit is capable of 50 Amps, which means a
40-Amp charging rate (using 80 percent of the circuit capacity).

Even if your first charging station is only capable of 24 Amps (as many
less-expensive ones are), you'll want to "future-proof" your garage wiring.

Third, tell the electrician to install a NEMA 6-50 socket--the one used by
most charging stations that aren't hard-wired--in the wall below the chosen
site.

One electrician we spoke to preferred hard-wiring, which eliminates
resistance heat between the plug and socket, but we wanted to allow the
charging station to go with us if we move.

Fourth, once you have your garage wired, THEN select your charging station
and bolt it securely to the wall.

Most people will buy a new one; we were lucky enough to have a used one
given to us by Green Car Reports contributor and electric-car advocate Tom
Moloughney, who was upgrading. (Thanks, Tom!)

There are more than a dozen charging stations on the market today.

They can be bought directly from the makers or found at big-box stores like
Best Buy, Home Depot, or Lowe's--from their websites if not necessarily in
stock at your local outlet.

Things to keep in mind:

 - Look for at least 24 Amps of charging capability; 40 Amps is best, but
more expensive

 - Charging rate should be at least 7.2 kilowatts, which will handle both
Chevy Volts (3.3 or 3.6 kW) and higher-rate cars like Nissan Leafs and BMW
i3s (6.6 and 7.2 kW, respectively)

 - Make sure it has that NEMA 6-50 plug on it!

 - Some charging stations are "dumb," while others come from makers (e.g.
ChargePoint) that offer online connections between your charger and a phone
app and/or online site that will show you instant and cumulative charging
statistics

 - Ensure the cord is long enough to reach a car parked outside the garage.
We'd suggest 16 feet at minimum, and 25 feet is well worth the extra cost
...

Remember: It's no more complex than [installing] an electric clothes drier
[outlet] --and there are millions of those in garages all over North
America.
[© greencarreports.com]
...
http://venturebeat.com/2016/02/28/how-to-wire-your-garage-for-electric-car-charging-what-you-need-to-know/
How to wire your garage for electric-car charging: what you need to know
FEBRUARY 28, 2016 




For EVLN EV-newswire posts use: 
http://evdl.org/evln/


{brucedp.150m.com}

--
View this message in context: 
http://electric-vehicle-discussion-list.413529.n4.nabble.com/EVLN-What-You-Need-To-Know-To-Wire-A-Garage-EVSE-tp4680829.html
Sent from the Electric Vehicle Discussion List mailing list archive at 
Nabble.com.
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
Read EVAngel's EV News at http://evdl.org/evln/
Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA)

Reply via email to