gnome-pilot is now maintained by JP Rosevear and Chris Toshok.  (In the
Cc: -- they should also be on this list but they must have missed these
questions.)

On Fri, 2003-02-28 at 18:57, Jack Coates wrote:
> Is gnome-pilot even maintained?
> http://www.gnome.org/projects/gnome-pilot/
> http://eskil.org/gnome-pilot
> 
> there seems to be some activity here,
> http://mail.gnome.org/archives/gnome-pilot-list/ I'll rejoin this list
> then.
> 
> thanks,
> Jack
> 
> On Thu, 2003-02-27 at 20:05, Jack Coates wrote:
> > Mandrake 9.0 on a Sony Vaio VX88 laptop with kernel 2.4.20-2mdk (visor.c
> > v1.6), trying to sync a Palm V via a Prolific PL2303 USB to serial
> > adapter as this laptop has no serial ports. Here's what that adapter
> > looks like:
> > 
> > Feb 27 16:08:30 chupacabra kernel: hub.c: new USB device 00:1f.2-1,
> > assigned address 2
> > Feb 27 16:08:30 chupacabra kernel: usb.c: USB device 2 (vend/prod
> > 0x67b/0x2303) is not claimed by any active driver.
> > Feb 27 16:08:33 chupacabra /etc/hotplug/usb.agent: Setup pl2303 for USB
> > product 67b/2303/202
> > Feb 27 16:08:33 chupacabra kernel: usbserial.c: USB Serial support
> > registered for PL-2303
> > Feb 27 16:08:33 chupacabra kernel: usbserial.c: PL-2303 converter
> > detected
> > Feb 27 16:08:33 chupacabra kernel: usbserial.c: PL-2303 converter now
> > attached to ttyUSB0 (or usb/tts/0 for devfs)
> > Feb 27 16:08:33 chupacabra kernel: pl2303.c: Prolific PL2303 USB to
> > serial adaptor driver v0.9
> > 
> > & here's the load of libraries, tools, &c...
> > [EMAIL PROTECTED] jack]$ rpm -qa | grep pilot
> > libgnome-pilot1-0.1.71-2mdk
> > pilot-link-0.11.5-5.ximian.1
> > gnome-pilot-conduits-0.10-1.ximian.1
> > libgnome-pilot1-devel-0.1.71-2mdk
> > evolution-pilot-1.2.2-1.ximian.1
> > gnome-pilot-0.1.71-2mdk
> > pilot-link-devel-0.11.5-5.ximian.1
> > 
> > And here's my problem: it works fine using pilot-xfer -- I can do
> > anything at all. gpilotd is totally useless, not even
> > gpilot-install-file works. Any ideas? I've tried running gpilotd from a
> > console to get its output, and it seems to be listening to the right
> > port, it just never hears the Palm V and eventually times out.

Attachment: signature.asc
Description: This is a digitally signed message part

Reply via email to