On Thu, 2003-06-12 at 22:00, Stephen Kuhn wrote:
> On Fri, 2003-06-13 at 08:56, Jason 'vanRijn' Kasper wrote:
>
> > I have this in my startup script:
> >
> > hdparm -u 1 -a 8 -c 1 -d 1 -k 1 /dev/hda
> >
> > and I get this when it's run:
> >
> > IO_support = 1 (32-bit)
> > unmaskirq = 1 (on)
> > using_dma = 1 (on)
> > keepsettings = 1 (on)
> > readahead = 8 (on)
> >
> > =:/
> >
> > Any other thoughts? =:)
>
> What about adding the -W1 and -A1 and -b2 switches to the hdparm script
> you're using - you can test out the results with:
>
> hdparm -tT /dev/hda
>
> ...to compare to what you've got beforehand...
Yup, familiar with that one. =:) And I added W1, A1, and b2, and it
didn't make any difference with the -Tt test.
*shrug* *scratching head*
--
,-----------------------------------------------------------------//
| Jason 'vanRijn' Kasper :: Numbers 6:22-26
`
| All brontosauruses are thin at one end, much MUCH thicker
| in the middle, and then thin again at the far end. That is
| the theory that I have and which is mine, and what it is too.
,
| bash$ :(){ :|:&};:
`----------------------//
_______________________________________________
evolution maillist - [EMAIL PROTECTED]
http://lists.ximian.com/mailman/listinfo/evolution
