On Mon, 2003-08-11 at 09:26, Nigel Metheringham wrote:
> On Mon, 2003-08-11 at 00:02, Jonathan Pryor wrote:
> > When I attempt to synchronize my Handspring Visor with Evolution 1.4, my
> > computer freezes, with the caps-lock and scroll-lock LED's blinking.
> > This is with the most recent Evolution available through Red Carpet,
> > running under Red Hat 9. I have parts of Ximian Desktop 2 installed as
> > well, but not all of it. (Call it a bastardized hybrid between the
> > default Red Hat 9 and XD2.)
> >
> > This is on a Dell Inspiron 4000 Laptop, though I doubt that should be a
> > factor.
>
> It is - this is apparently down to a race which occurs with some USB
> implementations.
>
> Its a kernel problem, but I don't currently know of a fix. Some
> compiles show the problem more often (I had one that triggered 2 out of
> 3 times), some less (most of my kernels fire this off 1 time in 20 or
> much fewer). I've seen the problem on and off on 2 different laptops
> over the last 18 months at least.
>
Yes, my (Dell) desktop machine was doing it for a while. It seems OK
now after I re-setup my pilot on the machine and did a kernel re-compile
(don't know which solved it, but I suspect my kernel re-compile!). Is
it Dell's USB implementation or are other machines affected?
Pete
--
Pete Biggs :{) [EMAIL PROTECTED] [EMAIL PROTECTED]
Phone: 01865 275490 (Work) 01865 275410 (Fax) [EMAIL PROTECTED]
_______________________________________________
evolution maillist - [EMAIL PROTECTED]
http://lists.ximian.com/mailman/listinfo/evolution
