A HA! Eureka even.
Chris
Edgardo Garcia Hoeffler <[EMAIL PROTECTED]> on 04/30/2001 05:47:34 PM
To: Chris Tooley/AMOA@AMOA
cc: [EMAIL PROTECTED]
Subject Re: [Evolution] Pilot Conduits in Evolution
: 0.10
Do you have gnome-vfs-devel installed??
If you don't, you need it ;-)
El 30 Apr 2001 16:43:02 -0500, [EMAIL PROTECTED] escribi&#-2;:
>
>
> Yes, which is how I meant to say it when I responed, however, the rpm still
> won't build as it's got some problem with gnome-vfs and editing configure and
> re-tarring the source doesn't do a bit of good.
>
> Chris
>
>
>
>
>
>
>
> Edgardo Garcia Hoeffler <[EMAIL PROTECTED]> on 04/30/2001 05:14:51
PM
>
>
>
> To: Chris Tooley/AMOA@AMOA
>
> cc: [EMAIL PROTECTED]
>
>
>
> Subject Re: [Evolution] Pilot Conduits in Evolution
> : 0.10
>
>
>
>
>
>
>
> Beware that the spec file that comes with evolution*.src.rpm doesn't
> have pilot conduits enable. You *must* edit it and add the flag I've
> told you to the configure script call.
> So if you just do a rpm --rebuild evolutio*src.rpm you'll end up with
> evolution compiled *without* pilot support. The same applies with rpm
> -Uvh evo*.src.rpm and then rpm -bb evo*src.rpm if you don't edit
> evolution.spec.
>
> El 30 Apr 2001 15:42:45 -0500, [EMAIL PROTECTED] escribi&#-2;:
> >
> >
> > Yeah, I was also sent a message by another list member, Edgardo Garcia
> Hoeffler,
> > to use the following command line option to turn it on.
> > --with-pilot-conduits=yes
> >
> > While all this is well and good, the source rpm I found on the ximian site
> does
> > not build because of a wrong gnome-vfs package that it can't find the
correct
> > version for. It is looking for 0.4.2 and I'm running 1.0-ximain.2 which of
> > course is not as high as 0.4.2. Manually editing Configure I guess.
> >
> > Chris Tooley
> >
> >
> >
> >
> >
> >
> >
> > "Michael Leone" <[EMAIL PROTECTED]> on 04/30/2001 03:30:47 PM
> >
> >
> >
> > To: "mark" <[EMAIL PROTECTED]>,
> > Chris Tooley/AMOA@AMOA
> >
> > cc: [EMAIL PROTECTED]
> >
> >
> >
> > Subject Re: [Evolution] Pilot Conduits in Evolution
> > : 0.10
> >
> >
> >
> >
> >
> >
> >
> > This won't activate the pilot coinduits, will it? I was under the impression
> > thatthere's some command line parameter that must be passed to the compiler.
> > This simply rebuilds the normal (i.e., non-conduit-enabled) version of
> > Evolution, doesn't it?
> > ----- Original Message -----
> > From: mark
> > To: [EMAIL PROTECTED]
> > Cc: [EMAIL PROTECTED]
> > Sent: Monday, April 30, 2001 3:40 PM
> > Subject: Re: [Evolution] Pilot Conduits in Evolution 0.10
> >
> >
> > Download the src.rpm :-)
> > then install (as root)using rpm -Uvh <filename>.src.rpm
> > this next step will depend on your distro, but if your using redhat it
will
> > install into:
> > /usr/src/redhat/SPECS
> > cd into their
> > and then enter:
> > rpm -ba <name-of-file>.spec
> > if u want to build for a diffent architecture than i386 just add
> --target=i686
> > or --target=i586 after it,
> > so say i want to rebuild evolution from a src.rpm for i686 arch heres the
> > steps i would use:
> >
> > rpm -Uvh evolution.src.rpm
> > cd /usr/src/redhat/SPECS
> > rpm -ba evolution.spec --target=i686
> >
> > this will then put the finished rpm into /usr/src/redhat/RPMS/i686
> >
> > then install as normal: rpm -Uvh evolution.i686.rpm
> >
> > Hope that helps
> >
> > Mark
> > On 30 Apr 2001 13:43:24 -0500, [EMAIL PROTECTED] wrote:
> > >
> > >
> > > I'm of the understanding that to get the Evolution conduits to work one
must
> > > recompile the source. If this is the case, how would one compile an
src.rpm
> > to
> > > get the necessary changes and still be able to install via RPM?
> > >
> > > Chris Tooley
> > >
> > >
> > >
> > > _______________________________________________
> > > evolution maillist - [EMAIL PROTECTED]
> > > http://lists.helixcode.com/mailman/listinfo/evolution
> > >
> >
> >
>
>
>
_______________________________________________
evolution maillist - [EMAIL PROTECTED]
http://lists.helixcode.com/mailman/listinfo/evolution
