I have this working with evolution. rh 8.0 is rather messed up when it comes to evolution. The documentation is quite out of date as there is (afik) know control panel as in gnome 1.4.
I found on a rh mailing list the following command: gpilotd-control-applet --cap-id=1 Ran it and a tool to enable conduits (including evolution) came up. You also have to make sure gpilotd is running. It worked for me. Of course, the sync for addressbook ignored all my category info! :-( Why this isn't on the faq, I don't know. :-) Ryan On Wed, 2002-11-27 at 21:33, Todd Long wrote: > I've seen a lot of discussion about this, but have seen no definitive > solutions. > > - pilot-xfer works fine with /dev/ttyUSB1 > - On the Devices tab of Pilot Link, I've tried about every logical > combination and still no communication with the Visor. > - I've installed the evolution-pilot rpm, still nothing. > > Has anyone got this to work? > > > Todd Long > Jireh Consulting, Inc. > > > _______________________________________________ > evolution maillist - [EMAIL PROTECTED] > http://lists.ximian.com/mailman/listinfo/evolution > -- Dr. Ryan Leduc Assistant Professor Email: [EMAIL PROTECTED] Dept. of Computing and Software Tel: 905-525-9140 Ext. 27962 Faculty of Engineering Fax: 905-524-0340 McMaster University, Office: ITB/162 Hamilton, Ontario Canada L8S 4K1 http://www.cas.mcmaster.ca/~leduc ---- "Most of the time in our world, truth is just opinion." - M. Ondaatje _______________________________________________ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
