On Sun, 2002-12-01 at 22:31, Harry Fine wrote: > Hi > > First time posting to this list, so I hope I'm clear. I have read > NOvember and December's list, and see I'm not alone with problems > syncing my Palm with Evolution. > > I can connect with the pilot-xfer command. First I press the hotsync > button, then I very quickly type the approprate pilot-xfer command, > and it will sync to the appropriate directory. > > however, I can't get it to sync with Evolution. With 1.08, I just > pressed the button, and it worked. I could see all the updated > entries in addresses and datebook in the Evolution program. Now, I > can use pilot-xfer to back up the files, but I can't see the changes > in Evolution. > > I'm hearing lots of different theories, and I'm sure it's being worked > on, but is there anyone with a workaround that works NOW, so I can > keep Evolution and my Palm in sync. > > I'm connected with a USB cradle, and have linked /dev/pilot to > /dev/ttyUSB1. I have the permissions set properly. Not only doesn't > it sync, but I can't even run the wizard that runs first time. When > it asks you to press the hotsync button to get info from the Palm, it > freezes. > > I read in one post in the archive that there should be a /dev/cradle. > Is that true? > Should I have gpilotd running all the time. It does not run by > default at boot time. > > Thanks > > Harry Fine > Toronto, Ontario Canada
You mentioned pretty much everything except whether you had the evolution-pilot package installed. If you don't, that's your problem. -- Mark Gordon <[EMAIL PROTECTED]> _______________________________________________ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution