Mertens, On Tue, 2002-12-03 at 05:18, Mertens Bram wrote: > On Sat, 2002-11-30 at 20:10, W Pennington wrote: > > Is your palm USB or Serial? > USB > > Which version of Evolution are you using? > evolution-1.2.0-1.ximian.1 > > Are you still using RH 7.3? > Yes, I have installed almost every available package and have updated > all I could through Red Carpet on a regular basis.
The evolution-pilot package was not available through red carpet when I installed it. You need this package to put the conduits in gnome-pilot. > I also upgraded to Evo 1.2 this way. > > Are you synchronizing using gpilotd? Is gpilotd working for you? > Yes, I set everything up through the Gnome Control Panel and after > several attempts it worked. I think maybe you have to log out and in > again for some reason. At least it only started working for me after > logging back in the next day. (I did NOT reboot, simply log out and > back in). Do you have the Evolution Conduits, you should be able to check through the GnomePanel. Look for EAddress, etc. > I can't explain why this would work, perhaps the gpilotd gets shut down > after some time, or when a user logs out... gpilotd tends to sleep or get defunct on my machine. I just kill the process and restart it in a terminal so I can see the output. Try this. $> killall gpilotd $> gpilotd now press the sync button. Sometimes it takes a while to wake the cradle. > I think that's what finally did the trick for me, I pressed the hotsync > button before starting evolution or opening the gnome control panel > again and once more after checking my settings (which I presume started > the daemon) and then it worked... > > Sorry I can't me more precise, I hope this is still useful to you... > > HTH -- Christopher Ness <[EMAIL PROTECTED]> Software Enginering III _______________________________________________ evolution maillist - [EMAIL PROTECTED] http://lists.ximian.com/mailman/listinfo/evolution
