On Tue, 2007-07-03 at 22:20 +0300, Michael S. Tsirkin wrote: > Try > #sh -x /etc/init.d/openibd restart > > does it write "connected" into the mode attribute? > Vlad, can you take a look pls?
Oh, I think I see the problem. From the output of the above command: + echo Setting up InfiniBand network interfaces: Setting up InfiniBand network interfaces: + for i in '$interfaces' + [[ ! -e /etc/infiniband/ifcfg-ib0 ]] + [[ ! -e /etc/sysconfig/network-scripts/ifcfg-ib0 ]] + echo 'No configuration found for ib0' No configuration found for ib0 While IPOIB_LOAD and SET_IPOIB_CM are set to yes, the code path that turns on connected mode is only reached if there is a network script for the interface (which there isn't, in this case). This seems wrong to me - the interface should come up in connected mode regardless of the presence of the network script, and I should be able to configure the IP address (and gateway, and broadcast, etc.) later. Jeremy _______________________________________________ ewg mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ewg
