opensm_release_notes: Catch OFED 1.3 docs up to Sasha's ofed_1_3 branch version
Signed-off-by: Hal Rosenstock <[EMAIL PROTECTED]> diff --git a/opensm_release_notes.txt b/opensm_release_notes.txt index bdefc11..edea872 100644 --- a/opensm_release_notes.txt +++ b/opensm_release_notes.txt @@ -35,7 +35,7 @@ This document includes the following sections: When enabled it collects a fabric port counters and able to log it or to pass to external program via event plugin interface. It handles counters overflow, supports LID/QP redirection and is able to work - when OpenSM is in master. standby and inactive states. + when OpenSM is in master, standby, and inactive states. * Dimension Order routing (DOR) algorithm DOR Unicast routing algorithm - based on the Min Hop algorithm, but @@ -61,7 +61,7 @@ This document includes the following sections: * PKey index support Proper support for PKey index in GSI queries. -* Incremental LFTs. PKey, SL2VL, VLarbitration table update +* Incremental LFTs, PKey, SL2VL, and VLarbitration table updates OpenSM will only fetch those tables in first heavy sweep and then will maintain this internally. @@ -70,7 +70,7 @@ This document includes the following sections: doesn't find this device as disconnected OpenSM will detect this by changed port states and handle accordingly. -* Duplicated GUIDs/port moving detector. +* Duplicated GUIDs/port moving detector OpenSM will be able to detect port moving during a fabric discovery and will not report duplicated GUIDs in this case. @@ -475,6 +475,18 @@ Device | Note iPath | QHT6040 (PathScale InfiniPath HT-460) iPath | QHT6140 (PathScale InfiniPath HT-465) iPath | QLE6140 (PathScale InfiniPath PE-880) +iPath | QLE7240 +iPath | QLE7280 -Note: OpenSM does not run on an IBM Galaxy (eHCA) as it does not expose +Note 1: OpenSM does not run on an IBM Galaxy (eHCA) as it does not expose QP0 and QP1. However, it does support it as a device on the subnet. + +Note 2: QoS firmware and Mellanox devices + +HCAs: QoS supported by ConnectX. The current FW release +doesn't support QoS. QoS-enabled FW release (2_5_000) is +planned for May. If someone wishes to get QoS-enabled FW +before the official release, they should contact Mellanox FAE. + +Switches: QoS supported by InfiniScale III +Any InfiniScale III FW that is supported by OpenSM supports QoS. _______________________________________________ ewg mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ewg
