I can reproduce this. Lemme dig into it...
Steve.
Scott Weitzenkamp (sweitzen) wrote:
Steve,
Thanks, that gets further, but dtest still fails.
Client side:
[EMAIL PROTECTED] ~]$ DAPL_MAX_INLINE=64 dtest -h 192.168.0.198
13926 Running as client - OpenIB-cma
13926 Server Name: 192.168.0.198
13926 Server Net Address: 192.168.0.198
13926 Waiting for connect response
13926 Error unexpected conn event : DAT_CONNECTION_EVENT_UNREACHABLE
13926 Error connect_ep: DAT_ABORT
13926: DAPL Test Complete.
13926: Message RTT: Total= 0.00 usec, 10 bursts, itime= 0.00
usec, pc=
0
13926: RDMA write: Total= 0.00 usec, 10 bursts, itime= 0.00
usec, pc=
0
13926: RDMA read: Total= 0.00 usec, 4 bursts, itime= 0.00
usec, pc
=0
13926: RDMA read: Total= 0.00 usec, 4 bursts, itime= 0.00
usec, pc
=0
13926: RDMA read: Total= 0.00 usec, 4 bursts, itime= 0.00
usec, pc
=0
13926: RDMA read: Total= 0.00 usec, 4 bursts, itime= 0.00
usec, pc
=0
13926: open: 36619.19 usec
13926: close: 32500.98 usec
13926: PZ create: 7.87 usec
13926: PZ free: 4.05 usec
13926: LMR create: 58.89 usec
13926: LMR free: 11.92 usec
13926: EVD create: 9.78 usec
13926: EVD free: 14.07 usec
13926: EP create: 78.92 usec
13926: EP free: 26.23 usec
13926: TOTAL: 199.79 usec
Server side:
[EMAIL PROTECTED] ~]$ DAPL_MAX_INLINE=64 dtest
11461 Running as server - OpenIB-cma
11461 Server waiting for connect request..
11461 Waiting for connect response
11461 CONNECTED!
11461 Send RMR to remote: snd_msg:
r_key_ctx=bff,pad=0,va=146db580,len=0x40
11461 Waiting for remote to send RMR data
11461 Error waiting on h_dto_rcv_evd: DAT_TIMEOUT_EXPIRED
11461 Error connect_ep: DAT_TIMEOUT_EXPIRED
11461: DAPL Test Complete.
11461: Message RTT: Total= 0.00 usec, 10 bursts, itime= 0.00
usec, pc=
0
11461: RDMA write: Total= 0.00 usec, 10 bursts, itime= 0.00
usec, pc=
0
11461: RDMA read: Total= 0.00 usec, 4 bursts, itime= 0.00
usec, pc
=0
11461: RDMA read: Total= 0.00 usec, 4 bursts, itime= 0.00
usec, pc
=0
11461: RDMA read: Total= 0.00 usec, 4 bursts, itime= 0.00
usec, pc
=0
11461: RDMA read: Total= 0.00 usec, 4 bursts, itime= 0.00
usec, pc
=0
11461: open: 900676.01 usec
11461: close: 31543.97 usec
11461: PZ create: 7.87 usec
11461: PZ free: 5.01 usec
11461: LMR create: 51.98 usec
11461: LMR free: 12.16 usec
11461: EVD create: 10.97 usec
11461: EVD free: 12.87 usec
11461: EP create: 77.01 usec
11461: EP free: 30.04 usec
11461: TOTAL: 195.03 usec
Scott
-----Original Message-----
From: Steve Wise [mailto:[EMAIL PROTECTED]
Sent: Thursday, April 03, 2008 9:19 AM
To: Scott Weitzenkamp (sweitzen)
Cc: Joshua Bernstein; OpenFabrics EWG; [ofa_general]
Subject: Re: [ewg] RE: [ofa-general] how do I use uDAPL with iWARP?
Scott Weitzenkamp (sweitzen) wrote:
I tried that, and it didn't work:
[EMAIL PROTECTED] ~]# grep eth /etc/dat.conf
OpenIB-cma u1.2 nonthreadsafe default libdaplcma.so.1
dapl.1.2 "eth2 0"
""
[EMAIL PROTECTED] ~]# dtest
10194 Running as server - OpenIB-cma
10194 Error dat_ep_create: DAT_INVALID_HANDLE
10194 Error freeing EP: DAT_INVALID_HANDLE DAT_INVALID_HANDLE_EP
try setting DAPL_MAX_INLINE=64
_______________________________________________
ewg mailing list
ewg@lists.openfabrics.org
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ewg
