Yes, I verified this is now fixed in the 2/02 build. I did however see another issue.
[r...@iclust-tiger1 OFED-1.4-20090204-0721]# /etc/init.d/openibd start Loading HCA driver and Access Layer: [ OK ] Setting up InfiniBand network interfaces: Bringing up interface ib0: [ OK ] No configuration found for ib1 Setting up service network . . . [ done ] Starting QLogic Virtual NIC [ OK ] Parsing Configuration file [FAILED] Please refer to /var/log/messages -----Original Message----- From: Woodruff, Robert J Sent: Wednesday, February 04, 2009 9:14 AM To: 'Eli Cohen' Cc: Vladimir Sokolovsky; Tziporet Koren; EWG Subject: RE: [ewg] OFED 1.4.1 daily build - MLX4 loading issue on Itanium This was the build from 1/30, but I will try today's build and see if the problems still exists. woody -----Original Message----- From: Eli Cohen [mailto:[email protected]] Sent: Wednesday, February 04, 2009 3:10 AM To: Woodruff, Robert J Cc: Vladimir Sokolovsky; Tziporet Koren; EWG Subject: Re: [ewg] OFED 1.4.1 daily build - MLX4 loading issue on Itanium On Tue, Feb 03, 2009 at 01:26:33PM -0800, Woodruff, Robert J wrote: > > Hay guys, > > It looks like there is an issue with the EL5.3 backport of the > mlnx4 driver on Itanium. > When I try to load the driver, I get. > > [r...@iclust-tiger2 infiniband]# /etc/init.d/openibd start > Loading Mellanox MLX4_IB HCA driver: [FAILED] > Loading HCA driver and Access Layer: [FAILED] > > Please open an issue in the https://bugs.openfabrics.org and attach > /tmp/ib_debug_info.log > > > Found this error in the dmesg log, which looks to be the culprit. > > > mlx4_ib: Unknown symbol hpage_shift This should'nt have happened with the latest ofa-1.4.build. Did you apply the backport on the latest build or some eariler version? _______________________________________________ ewg mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ewg
