There was a bug in build_mlx_header() that I commited on Thursday. The bug was a failure to edit the MAD correctly. It has been fixed in the latest build. Sorry for any inconvenience.
On Fri, Feb 19, 2010 at 03:02:07PM -0800, Woodruff, Robert J wrote: > > I have 2 systems that have Mellanox dual port connectx > cards with one of the ports connected to a and SDR switch > and the other port direct connected. > > With today's OFED-1.5.1 daily build, the OpenSM does > not seem to transition the port all the way up. > If I use OFED-1.5.1-rc1, it works fine. > > [r...@woody-10 woody]# /etc/init.d/opensmd start > Starting IB Subnet Manager. [ OK ] > [r...@woody-10 woody]# /usr/sbin/ibstat > CA 'mlx4_0' > CA type: MT26428 > Number of ports: 2 > Firmware version: 2.7.0 > Hardware version: a0 > Node GUID: 0x0002c90300044fa8 > System image GUID: 0x0002c90300044fab > Port 1: > State: Armed > Physical state: LinkUp > Rate: 10 > Base lid: 1 > LMC: 0 > SM lid: 1 > Capability mask: 0x0251086a > Port GUID: 0x0002c90300044fa9 > Port 2: > State: Initializing > Physical state: LinkUp > Rate: 40 > Base lid: 0 > LMC: 0 > SM lid: 0 > Capability mask: 0x02510868 > Port GUID: 0x0002c90300044faa > [r...@woody-10 woody]# > _______________________________________________ > ewg mailing list > ewg@lists.openfabrics.org > http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ewg _______________________________________________ ewg mailing list ewg@lists.openfabrics.org http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ewg