Hi Yuri, Turn logs on by setting in libsdp.conf: log min-level 1 destination stderr
just from reading the configuration file - change the /244 into /24 when specifying IP's - Amir On 04/11/2010 04:25 PM, Yury Serdyuk wrote: > Hi ! > > I have a small cluster with 2 nodes connected by Infiniband interconnect. > In fact, the nodes have the following IP-addresses: > > >> -bash-3.2$ /sbin/ifconfig >> eth0 Link encap:Ethernet HWaddr 00:30:48:CB:9D:EA >> inet addr:83.149.223.243 Bcast:83.149.223.255 >> Mask:255.255.248.0 >> >> ib0 Link encap:InfiniBand HWaddr >> 80:00:00:48:FE:80:00:00:00:00:00:00:00:00:00:00:00:00:00:00 >> inet addr:10.63.223.243 Bcast:10.63.255.255 Mask:255.255.0.0 >> > and > > >> -bash-3.2$ /sbin/ifconfig >> eth0 Link encap:Ethernet HWaddr 00:30:48:CB:9E:48 >> inet addr:83.149.223.244 Bcast:83.149.223.255 >> Mask:255.255.248.0 >> >> ib0 Link encap:InfiniBand HWaddr >> 80:00:00:48:FE:80:00:00:00:00:00:00:00:00:00:00:00:00:00:00 >> inet addr:10.63.223.244 Bcast:10.63.255.255 Mask:255.255.0.0 >> > Further, I have the following libsdp.conf file: > > >> use tcp connect * 10.63.223.243/244:22 >> use sdp connect * 10.63.223.243/244:* >> use sdp listen * 10.63.223.243/244:* >> use tcp server * *:* >> use tcp client * *:* >> > In fact, SDP works good when programs are running on any of the > 10.63.223.243/244 nodes. > > The problem is the following: > > when I am trying to do ssh from the frontend of the cluster to one of > the working nodes, > I have got > > >> -bash-3.2$ ssh 10.63.223.243 >> socket: Address family not supported by protocol >> ssh: connect to host 10.63.223.243 port 22: Address family not >> supported by protocol >> > From the other side, ping to the node is performed well: > > >> -bash-3.2$ ping 10.63.223.243 >> PING 10.63.223.243 (10.63.223.243) 56(84) bytes of data. >> 64 bytes from 10.63.223.243: icmp_seq=1 ttl=64 time=0.594 ms >> 64 bytes from 10.63.223.243: icmp_seq=2 ttl=64 time=0.040 ms >> 64 bytes from 10.63.223.243: icmp_seq=3 ttl=64 time=0.041 ms >> > So, how to configure libsdp.conf file that admit a right login by ssh ? > > Thanks. > > Yury. > _______________________________________________ > ewg mailing list > [email protected] > http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ewg > _______________________________________________ ewg mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ewg
