Okay, thanks. -J
On Tue, Feb 15, 2011 at 8:10 PM, Gilad Shainer <[email protected]> wrote: > You may want to check with [email protected]. > > > > Gilad > > > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Jagga Soorma > *Sent:* Tuesday, February 15, 2011 8:07 PM > *To:* [email protected] > *Subject:* [ewg] Mellanox IB/10Gige Card > > > > Hi Guys, > > I have a server that is supposed to have a QDR port and a port that is > supposed to be a 10Gbe port. When I run ibstatus, the 10Gbe port seems to > be disabled. Is there a way to enable this port? > > -- > [root@node01 ~]# ibstatus > Infiniband device 'mlx4_0' port 1 status: > default gid: fe80:0000:0000:0000:78e7:d103:0021:887d > base lid: 0x12 > sm lid: 0x1 > state: 4: ACTIVE > phys state: 5: LinkUp > rate: 40 Gb/sec (4X QDR) > link_layer: IB > > Infiniband device 'mlx4_0' port 2 status: > default gid: fe80:0000:0000:0000:7ae7:d1ff:fe21:887d > base lid: 0x0 > sm lid: 0x0 > state: 1: DOWN > phys state: 3: Disabled > rate: 40 Gb/sec (4X QDR) > link_layer: Ethernet > -- > > Should I be using ibportstate to enable this port 2? Any help would be > greatly appreciated. I have the mellanox ofed installed on this server. > > Thanks, > -J >
_______________________________________________ ewg mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ewg
