I may goto performance test after this. On Thu, Mar 3, 2011 at 2:32 PM, Tanin <[email protected]> wrote:
> > > ---------- Forwarded message ---------- > From: Tanin <[email protected]> > Date: Thu, Mar 3, 2011 at 2:32 PM > Subject: Re: [ewg] iWARP WAN test problem > To: "Walukiewicz, Miroslaw" <[email protected]> > > > Yes, that definitely works. > > Since we have four interfaces on each host, and the gateway is configured > with the regular Gigabit Ethernet card. When I change the default gateway to > iWARP card, rping goes to work! Thanks for your help. I really appreciate > that. > > On Thu, Mar 3, 2011 at 2:29 PM, Walukiewicz, Miroslaw < > [email protected]> wrote: > >> Tan, >> >> >> >> Do you have a possibility to check if your configuration works in >> back-to-back configuration( without IP router) in the same IP subnet? >> >> >> >> Regards, >> >> >> >> Mirek >> >> *From:* [email protected] [mailto: >> [email protected]] *On Behalf Of *Tanin >> *Sent:* Thursday, March 03, 2011 2:46 PM >> >> *To:* [email protected] >> *Cc:* OpenFabrics EWG >> >> *Subject:* Re: [ewg] iWARP WAN test problem >> >> >> >> Thanks, Richard. >> >> So, is that also apply to iWARP? If there is an IP router in between the >> path, iWARP would not work, right? >> >> >> >> >> >> >> On Thu, Mar 3, 2011 at 4:21 AM, [email protected] < >> [email protected]> wrote: >> >> RDMA only works over layer2 Ethernet. If you have an IP router in path it >> won't work. >> For long haul infiniband we use buffer devices, such as obsidian longbows, >> to sustain throughput over the long haul. >> >> Richard >> >> >> >> >> -- >> >> Best regards, >> >> >> >> >> ----------------------------------------------------------------------------------------------- >> Li, Tan >> PhD Candidate & Research Assistant, >> Electrical Engineering, >> Stony Brook University, NY >> >> Personal Web Site: https://sites.google.com/site/homepagelitan/Home >> >> Email: [email protected] >> >> >> > > > > -- > Best regards, > > > ----------------------------------------------------------------------------------------------- > Li, Tan > PhD Candidate & Research Assistant, > Electrical Engineering, > Stony Brook University, NY > > Personal Web Site: https://sites.google.com/site/homepagelitan/Home > > Email: [email protected] > > > > > -- > Best regards, > > > ----------------------------------------------------------------------------------------------- > Li, Tan > PhD Candidate & Research Assistant, > Electrical Engineering, > Stony Brook University, NY > > Personal Web Site: https://sites.google.com/site/homepagelitan/Home > > Email: [email protected] > > -- Best regards, ----------------------------------------------------------------------------------------------- Li, Tan PhD Candidate & Research Assistant, Electrical Engineering, Stony Brook University, NY Personal Web Site: https://sites.google.com/site/homepagelitan/Home Email: [email protected]
_______________________________________________ ewg mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ewg
