在 2019/9/24 23:33, Vladimir Sokolovsky 写道:
> On 09/24/2019 06:18 AM, oulijun wrote:
>> Hi, Arlin R & Vlad
>> I am following the steps you gave to verify and use, the cmd as follows:
>>
>> To build working tree for manual compilation: # mkdir ofed # cd ofed # git
>> clone git://git.openfabrics.org/compat-rdma/compat-rdma.git # git clone
>> git://git.openfabrics.org/compat-rdma/linux-5.3.git # git clone
>> git://git.openfabrics.org/compat-rdma/compat.git # OFED_EWG_DIR=$PWD # cd
>> compat-rdma # GIT_TREE=${OFED_EWG_DIR}/linux-5.3
>> GIT_COMPAT_TREE=${OFED_EWG_DIR}/compat ./scripts/admin_rdma.sh -n -p To
>> compile drivers: # ./configure --with-core-mod --with-ipoib-mod
>> --with-ipoib_debug-mod --with-ipoib_debug_data-mod --with-user_mad-mod
>> --with-user_access-mod --with-addr_trans-mod --with-mlx4-mod
>> --with-mlx4_core-mod --with-mlx4_en-mod --with-mlx4_inf-mod
>> --with-mlx4_debug-mod --with-ipoib-cm --with-srp-mod --with-iser-mod
>> --with-iscsi-mod --with-isert-mod Add other relevant flags... # make # make
>> install However, the error as follows: oulijun@EstBuildSvr1:~/OFED$
>> OFED_EWG_DIR=$PWD oulijun@EstBuildSvr1:~/OFED$ cd compat-rdma/
>> oulijun@EstBuildSvr1:~/OFED/compat-rdma$
>> GIT_TREE=${OFED_EWG_DIR}/linux-5.3 GIT_COMPAT_TREE=${OFED_EWG_DIR}/compat
>> ./scripts/admin_rdma.sh -n -p [snip] Base tree: linux-5.3.git Base tree
>> version: 3d05bf7 compat.git: vofed-4.17-1-14-g761116a compat-rdma release:
>> gfd0060b-np oulijun@EstBuildSvr1:~/OFED/compat-rdma$
>> oulijun@EstBuildSvr1:~/OFED/compat-rdma$
>> oulijun@EstBuildSvr1:~/OFED/compat-rdma$ ./configure --with-core-mod
>> --with-ipoib-mod --with-ipoib_debug-mod --with-ipoib_debug_data-mod
>> --with-user_mad-mod --with-user_access-mod --with-addr_trans-mod
>> --with-mlx4-mod --with-mlx4_core-mod --with-mlx4_en-mod --with-mlx4_inf-mod
>> --with-mlx4_debug-mod --with-ipoib-cm --with-srp-mod --with-iser-mod
>> --with-iscsi-mod --with-isert-mod Created configure.mk.kernel: Created
>> /home/oulijun/OFED/compat-rdma/include/generated/autoconf.h ./configure
>> --with-linux-obj=/lib/modules/4.2.0-27-generic/build
>> --with-linux=/lib/modules/4.2.0-27-generic/source [snip]
>> /usr/src/linux-headers-4.2.0-27-generic
>> /usr/src/linux-headers-4.2.0-27-generic checking for Linux sources...
>> /lib/modules/4.2.0-27-generic/source checking for
>> /lib/modules/4.2.0-27-generic/source... no configure: error: Kernel source
>> /lib/modules/4.2.0-27-generic/source could not be found. Failed executing
>> ./configureoulijun@EstBuildSvr1:~/OFED/compat-rdma$ make grep:
>> 4.2.0-27-generic/include/linux/blkdev.h: No such file or directory Building
>> kernel modules Kernel version: 4.2.0-27-generic Modules directory:
>> //lib/modules/4.2.0-27-generic/updates Kernel sources:
>> /lib/modules/4.2.0-27-generic/build env CWD=/home/oulijun/OFED/compat-rdma
>> BACKPORT_INCLUDES= \ make -C /lib/modules/4.2.0-27-generic/build
>> M="/home/oulijun/OFED/compat-rdma" \ V=0 KBUILD_NOCMDDEP=1 \
>> CONFIG_53C700_BE_BUS= CONFIG_53C700_LE_ON_BE= CONFIG_A2091_SCSI=
>> CONFIG_A3000_SCSI= CONFIG_ATARI_SCSI= CONFIG_B44= CONFIG_B44_PCI=
>> CONFIG_B44_PCI_AUTOSELECT= CONFIG_B44_PCICORE_AUTOSELECT=
>> CONFIG_BCM63XX_ENET= CONFIG_BCMGENET= CONFIG_BE2NET=
>> CONFIG_BE2NET_BE2= CONFIG_BE2NET_BE3= CONFIG_BE2NET_HWMON=
>> CONFIG_BE2NET_LANCER= CONFIG_BE2NET_SKYHAWK= CONFIG_BGMAC=
>> CONFIG_BGMAC_BCMA= CONFIG_BGMAC_PLATFORM= CONFIG_BLK_DEV_3W_XXXX_RAID=
>> CONFIG_BLK_DEV_NVME= CONFIG_BLK_DEV_SD= CONFIG_BLK_DEV_SR=
>> CONFIG_BLK_DEV_SR_VENDOR= CONFIG_BNX2= CONFIG_BNX2X= CONFIG_BNX2X_SRIOV=
>> CONFIG_BNXT= CONFIG_BNXT_DCB= CONFIG_BNXT_FLOWER_OFFLOAD= CONFIG_BNXT_HWMON=
>> CONFIG_BNXT_SRIOV= CONFIG_BVME6000_SCSI= CONFIG_CHELSIO_LIB=
>> CONFIG_CHELSIO_T1= CONFIG_CHELSIO_T1_1G= CONFIG_CHELSIO_T3=
>> CONFIG_CHELSIO_T4= CONFIG_CHELSIO_T4_DCB= CONFIG_CHELSIO_T4_FCOE=
>> CONFIG_CHELSIO_T4VF= CONFIG_CHR_DEV_SCH= CONFIG_CHR_DEV_SG=
>> CONFIG_CHR_DEV_ST= CONFIG_CNIC= CONFIG_COMPAT_RDMA=m CONFIG_E100=
>> CONFIG_E1000= CONFIG_E1000E= CONFIG_E1000E_HWTS= CONFIG_FCOE=
>> CONFIG_FCOE_FNIC= CONFIG_FM10K= CONFIG_GVP11_SCSI=
>> CONFIG_HFI1_DEBUG_SDMA_ORDER= CONFIG_HYPERV_STORAGE= CONFIG_I40E=
>> CONFIG_I40E_DCB= CONFIG_I40EVF= CONFIG_IAVF= CONFIG_ICE= CONFIG_IGB=
>> CONFIG_IGB_DCA=
>> CONFIG_IGB_HWMON= CONFIG_IGBVF= CONFIG_IGC= CONFIG_INFINIBAND_ADDR_TRANS=y
>> CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y CONFIG_INFINIBAND_BNXT_RE=
>> CONFIG_INFINIBAND_CXGB3= CONFIG_INFINIBAND_CXGB4= CONFIG_INFINIBAND_EFA=
>> CONFIG_INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI= CONFIG_INFINIBAND_HFI1=
>> CONFIG_INFINIBAND_HNS= CONFIG_INFINIBAND_HNS_HIP06=
>> CONFIG_INFINIBAND_HNS_HIP08= CONFIG_INFINIBAND_I40IW=
>> CONFIG_INFINIBAND_IPOIB=m CONFIG_INFINIBAND_IPOIB_CM=y
>> CONFIG_INFINIBAND_IPOIB_DEBUG=y CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
>> CONFIG_INFINIBAND_ISER=m CONFIG_INFINIBAND_ISERT=m CONFIG_INFINIBAND_MTHCA=
>> CONFIG_INFINIBAND_MTHCA_DEBUG= CONFIG_INFINIBAND_OCRDMA=
>> CONFIG_INFINIBAND_ON_DEMAND_PAGING= CONFIG_INFINIBAND_OPA_VNIC=
>> CONFIG_INFINIBAND_QEDR= CONFIG_INFINIBAND_QIB= CONFIG_INFINIBAND_QIB_DCA=
>> CONFIG_INFINIBAND_RDMAVT= CONFIG_INFINIBAND_SRP=m CONFIG_INFINIBAND_SRPT=
>> CONFIG_INFINIBAND_USER_ACCESS=m CONFIG_INFINIBAND_USER_MAD=m
>> CONFIG_INFINIBAND_USER_MEM=y CONFIG_INFINIBAND_USNIC=
>> CONFIG_INFINIBAND_VMWARE_PVRDMA= CONFIG_ISCSI_BOOT_SYSFS= CONFIG_ISCSI_TCP=m
>> CONFIG_IXGB= CONFIG_IXGBE= CONFIG_IXGBE_DCA= CONFIG_IXGBE_DCB=
>> CONFIG_IXGBE_HWMON= CONFIG_IXGBE_IPSEC= CONFIG_IXGBEVF=
>> CONFIG_IXGBEVF_IPSEC= CONFIG_JAZZ_ESP= CONFIG_LIBFC= CONFIG_LIBFCOE=
>> CONFIG_MAC_SCSI= CONFIG_MLX4_CORE=m CONFIG_MLX4_CORE_GEN2=
>> CONFIG_MLX4_DEBUG=y CONFIG_MLX4_EN=m CONFIG_MLX4_EN_DCB=y
>> CONFIG_MLX4_INFINIBAND=m CONFIG_MLX5_ACCEL= CONFIG_MLX5_CORE=
>> CONFIG_MLX5_CORE_EN= CONFIG_MLX5_CORE_EN_DCB= CONFIG_MLX5_CORE_IPOIB=
>> CONFIG_MLX5_EN_ARFS= CONFIG_MLX5_EN_IPSEC= CONFIG_MLX5_EN_RXNFC=
>> CONFIG_MLX5_EN_TLS= CONFIG_MLX5_ESWITCH= CONFIG_MLX5_FPGA=
>> CONFIG_MLX5_FPGA_IPSEC= CONFIG_MLX5_FPGA_TLS= CONFIG_MLX5_INFINIBAND=
>> CONFIG_MLX5_MPFS= CONFIG_MLX5_TLS= CONFIG_MLXFW= CONFIG_MLXSW_CORE=
>> CONFIG_MLXSW_CORE_HWMON= CONFIG_MLXSW_CORE_THERMAL= CONFIG_MLXSW_I2C=
>> CONFIG_MLXSW_MINIMAL= CONFIG_MLXSW_PCI= CONFIG_MLXSW_SPECTRUM=
>> CONFIG_MLXSW_SPECTRUM_DCB= CONFIG_MLXSW_SWITCHIB= CONFIG_MLXSW_SWITCHX2=
>> CONFIG_MVME147_SCSI= CONFIG_MVME16x_SCSI= CONFIG_NET_VENDOR_BROADCOM=
>> CONFIG_NET_VENDOR_CHELSIO= CONFIG_NET_VENDOR_EMULEX=
>> CONFIG_NET_VENDOR_INTEL= CONFIG_NET_VENDOR_MELLANOX=
>> CONFIG_NET_VENDOR_QLOGIC= CONFIG_NETXEN_NIC= CONFIG_NVME_CORE=
>> CONFIG_NVME_FABRICS= CONFIG_NVME_FC= CONFIG_NVME_MULTIPATH=
>> CONFIG_NVME_RDMA= CONFIG_NVME_TARGET= CONFIG_NVME_TARGET_FC=
>> CONFIG_NVME_TARGET_FCLOOP= CONFIG_NVME_TARGET_LOOP= CONFIG_NVME_TARGET_RDMA=
>> CONFIG_NVME_TARGET_TCP= CONFIG_NVME_TCP= CONFIG_QED= CONFIG_QEDE=
>> CONFIG_QEDF= CONFIG_QED_FCOE= CONFIG_QEDI= CONFIG_QED_ISCSI= CONFIG_QED_LL2=
>> CONFIG_QED_OOO= CONFIG_QED_RDMA= CONFIG_QED_SRIOV= CONFIG_QLA3XXX=
>> CONFIG_QLCNIC= CONFIG_QLCNIC_DCB= CONFIG_QLCNIC_HWMON= CONFIG_QLCNIC_SRIOV=
>> CONFIG_QLGE= CONFIG_RAID_ATTRS= CONFIG_RDMA_RXE= CONFIG_RDMA_SIW=
>> CONFIG_RDS= CONFIG_RDS_DEBUG= CONFIG_RDS_RDMA= CONFIG_RDS_TCP=
>> CONFIG_RPCSEC_GSS_KRB5= CONFIG_SB1250_MAC= CONFIG_SCSI= CONFIG_SCSI_3W_9XXX=
>> CONFIG_SCSI_3W_SAS= CONFIG_SCSI_A4000T=
>> CONFIG_SCSI_AACRAID= CONFIG_SCSI_ACARD= CONFIG_SCSI_ADVANSYS=
>> CONFIG_SCSI_AHA152X= CONFIG_SCSI_AHA1542= CONFIG_SCSI_AHA1740=
>> CONFIG_SCSI_AM53C974= CONFIG_SCSI_ARCMSR= CONFIG_SCSI_BFA_FC=
>> CONFIG_SCSI_BUSLOGIC= CONFIG_SCSI_CONSTANTS= CONFIG_SCSI_CXGB3_ISCSI=
>> CONFIG_SCSI_CXGB4_ISCSI= CONFIG_SCSI_DC395x= CONFIG_SCSI_DEBUG=
>> CONFIG_SCSI_DMA= CONFIG_SCSI_DMX3191D= CONFIG_SCSI_DPT_I2O=
>> CONFIG_SCSI_ENCLOSURE= CONFIG_SCSI_ESP_PIO= CONFIG_SCSI_FC_ATTRS=
>> CONFIG_SCSI_FDOMAIN= CONFIG_SCSI_FDOMAIN_ISA= CONFIG_SCSI_FDOMAIN_PCI=
>> CONFIG_SCSI_FLASHPOINT= CONFIG_SCSI_GDTH= CONFIG_SCSI_GENERIC_NCR5380=
>> CONFIG_SCSI_HPSA= CONFIG_SCSI_HPTIOP= CONFIG_SCSI_IBMVFC=
>> CONFIG_SCSI_IBMVFC_TRACE= CONFIG_SCSI_IBMVSCSI= CONFIG_SCSI_IBMVSCSIS=
>> CONFIG_SCSI_IMM= CONFIG_SCSI_INIA100= CONFIG_SCSI_INITIO= CONFIG_SCSI_IPR=
>> CONFIG_SCSI_IPR_DUMP= CONFIG_SCSI_IPR_TRACE= CONFIG_SCSI_IPS=
>> CONFIG_SCSI_ISCI= CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_IZIP_EPP16=
>> CONFIG_SCSI_IZIP_SLOW_CTR= CONFIG_SCSI_LASI700=
>> CONFIG_SCSI_LOGGING= CONFIG_SCSI_LPFC= CONFIG_SCSI_LPFC_DEBUG_FS=
>> CONFIG_SCSI_MAC53C94= CONFIG_SCSI_MAC_ESP= CONFIG_SCSI_MESH=
>> CONFIG_SCSI_MESH_RESET_DELAY_MS= CONFIG_SCSI_MESH_SYNC_RATE=
>> CONFIG_SCSI_MOD= CONFIG_SCSI_MVUMI= CONFIG_SCSI_MYRB= CONFIG_SCSI_MYRS=
>> CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS= CONFIG_SCSI_NCR53C8XX_MAX_TAGS=
>> CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT= CONFIG_SCSI_NCR53C8XX_SYNC=
>> CONFIG_SCSI_NETLINK= CONFIG_SCSI_NSP32= CONFIG_SCSI_PM8001=
>> CONFIG_SCSI_PMCRAID= CONFIG_SCSI_PPA= CONFIG_SCSI_PROC_FS=
>> CONFIG_SCSI_QLOGIC_1280= CONFIG_SCSI_QLOGIC_FAS= CONFIG_SCSI_QLOGICPTI=
>> CONFIG_SCSI_SAS_ATTRS= CONFIG_SCSI_SCAN_ASYNC= CONFIG_SCSI_SIM710=
>> CONFIG_SCSI_SNI_53C710= CONFIG_SCSI_SNIC= CONFIG_SCSI_SNIC_DEBUG_FS=
>> CONFIG_SCSI_SPI_ATTRS= CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_STEX=
>> CONFIG_SCSI_SUNESP= CONFIG_SCSI_SYM53C8XX_2=
>> CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=
>> CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE= CONFIG_SCSI_SYM53C8XX_MAX_TAGS=
>> CONFIG_SCSI_SYM53C8XX_MMIO=
>> CONFIG_SCSI_VIRTIO= CONFIG_SCSI_WD719X= CONFIG_SCSI_ZALON=
>> CONFIG_SCSI_ZORRO7XX= CONFIG_SCSI_ZORRO_ESP= CONFIG_SDMA_VERBOSITY=
>> CONFIG_SGIWD93_SCSI= CONFIG_SUN3_SCSI= CONFIG_SUN3X_ESP= CONFIG_SUNRPC=
>> CONFIG_SUNRPC_BACKCHANNEL= CONFIG_SUNRPC_DEBUG=
>> CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES= CONFIG_SUNRPC_GSS=
>> CONFIG_SUNRPC_SWAP= CONFIG_SUNRPC_XPRT_RDMA= CONFIG_SYSTEMPORT=
>> CONFIG_TIGON3= CONFIG_TIGON3_HWMON= CONFIG_VMWARE_PVSCSI=
>> CONFIG_XEN_SCSI_FRONTEND= CONFIG_ZFCP= \ LINUXINCLUDE=' \ -D__OFED_BUILD__ \
>> -D__KERNEL__ \ -DCOMPAT_BASE="\"vofed-4.17-1-14-g761116a\""
>> -DCOMPAT_BASE_TREE="\"linux-5.3.git\""
>> -DCOMPAT_BASE_TREE_VERSION="\"3d05bf7\"" -DCOMPAT_PROJECT="\"Compat-rdma\""
>> -DCOMPAT_VERSION="\"gfd0060b-np\"" \ -include
>> /lib/modules/4.2.0-27-generic/build/include/generated/autoconf.h \ \
>> -include /home/oulijun/OFED/compat-rdma/include/linux/compat-2.6.h \ \ \ \
>> -I/home/oulijun/OFED/compat-rdma/include \
>> -I/home/oulijun/OFED/compat-rdma/include/uapi \
>> -I/home/oulijun/OFED/compat-rdma/drivers/infiniband/debug \
>> -I/usr/local/include/scst \
>> -I/home/oulijun/OFED/compat-rdma/drivers/infiniband/ulp/srpt \ $(if
>> $(CONFIG_XEN),-D__XEN_INTERFACE_VERSION__=$(CONFIG_XEN_INTERFACE_VERSION)) \
>> $(if $(CONFIG_XEN),-I$(srctree)/arch/x86/include/mach-xen) \
>> -I$(srctree)/arch/$(SRCARCH)/include \ -Iarch/$(SRCARCH)/include/generated \
>> -Iinclude \ -I$(srctree)/arch/$(SRCARCH)/include/uapi \
>> -Iarch/$(SRCARCH)/include/generated/uapi \ -I$(srctree)/include \
>> -I$(srctree)/include/uapi \ -Iinclude/generated/uapi \ $(if
>> $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \
>> -I$(srctree)/arch/$(SRCARCH)/include \ -Iarch/$(SRCARCH)/include/generated \
>> ' \ modules make[1]: Entering directory
>> '/usr/src/linux-headers-4.2.0-27-generic' CC [M]
>> /home/oulijun/OFED/compat-rdma/compat/main.o In file included from
>> <command-line>:0:0:
>> /home/oulijun/OFED/compat-rdma/include/linux/compat-2.6.h:7:33: fatal error:
>> ../../compat/config.h: No such file or directory
>> #include "../../compat/config.h" ^ compilation terminated.
>> scripts/Makefile.build:258: recipe for target
>> '/home/oulijun/OFED/compat-rdma/compat/main.o' failed make[3]: ***
>> [/home/oulijun/OFED/compat-rdma/compat/main.o] Error 1
>> scripts/Makefile.build:403: recipe for target
>> '/home/oulijun/OFED/compat-rdma/compat' failed make[2]: ***
>> [/home/oulijun/OFED/compat-rdma/compat] Error 2 Makefile:1398: recipe for
>> target '_module_/home/oulijun/OFED/compat-rdma' failed make[1]: ***
>> [_module_/home/oulijun/OFED/compat-rdma] Error 2 make[1]: Leaving directory
>> '/usr/src/linux-headers-4.2.0-27-generic' makefile:70: recipe for target
>> 'kernel' failed make: *** [kernel] Error 2
>> oulijun@EstBuildSvr1:~/OFED/compat-rdma$ Please forgive me for taking the
>> liberty, Because I was trying for the first time, I don't know how to
>> resolved the build error? Beside, if i want to build hns, how to do and set
>> the config? Lijun Ou
>
> Hi Lijun,
> OFED-5.3 does not support Ubuntu. In this specific case configure script
> failed to find kernel headers and therefore did not create compat/config.h.
> Please use one of the supported Distros.
>
> Regards,
> Vladimir
Thanks. I am trying to find redhat or suse enviroment to test and may need some
time. Can you tell me the specific mistake? I think that it is a configured
quesiton
because the hns diriver need /driver/net/ethernet/hisilicon/hns and hns3.
_______________________________________________
ewg mailing list
[email protected]
https://lists.openfabrics.org/mailman/listinfo/ewg
