Re ran the install and now it appears more issues have come up. I can no longer access anything from EMS either now. Gives error "The WS-Management service does not support the request." I checked Powershell virtual directory, the 'kerbauth' info in IIS and verified the Exchange variable is pointing to the right install path (D:\Program Files\...).
Is there a simple way to bring back the EMS access so I can just disable/delete all the mailboxes and remove Exchange completely and start from scratch? From: Geoff Orlebeck Sent: Tuesday, November 26, 2013 10:34 AM To: '[email protected]' Subject: RE: [Exchange] Ex2010 EMC Initialization Fails: I'm not sure of how to force the reinstall. If I try running through the installer it is asking me to check a new role. Is it a cmd line switch that has to be used to force the reinstall? From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Michael B. Smith Sent: Tuesday, November 26, 2013 10:23 AM To: [email protected]<mailto:[email protected]> Subject: RE: [Exchange] Ex2010 EMC Initialization Fails: Try an in-place reinstall first. Realistically, there are 3 scripts that need to be executed, that didn't get executed, because you didn't run it from an elevated command prompt and you changed the default config. From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Geoff Orlebeck Sent: Tuesday, November 26, 2013 1:15 PM To: [email protected]<mailto:[email protected]> Subject: RE: [Exchange] Ex2010 EMC Initialization Fails: I guess that is the next best course of action. Again, excuse my inexperience, but when you say "reinstall" you are referring to performing an actual uninstall then reinstall...not just re-running the installer and trying to install over the top of the existing installation, yes? From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Michael B. Smith Sent: Tuesday, November 26, 2013 10:12 AM To: [email protected]<mailto:[email protected]> Subject: RE: [Exchange] Ex2010 EMC Initialization Fails: While IPv6 is required for supportability, it does not cause this particular issue. A reinstall will not undo any work, as long as you specify the same set of parameters. :) From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Geoff Orlebeck Sent: Tuesday, November 26, 2013 1:06 PM To: [email protected]<mailto:[email protected]> Subject: RE: [Exchange] Ex2010 EMC Initialization Fails: Michael: I was looking through various links and TechNet articles and found something related to IPv6. I noticed the server replied to ping with IPv6 addresses, but IPv6 was unchecked in the NIC properties (I'm inheriting the base 2008 R2 server from a build template). I didn't see the reg key in there for disabling IPv6, or at least setting IPv4 as the preferred method. I added it and the server is now replying with IPv4 address, but the issue persists. Not sure if that has anything to do with this. As for the reinstall of Exchange, I just want to confirm whatever work I have already performed won't be undone by the reinstall (database creation and mailbox additions to AD users). Thanks. Geoff From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Michael B. Smith Sent: Tuesday, November 26, 2013 9:56 AM To: [email protected]<mailto:[email protected]> Subject: RE: [Exchange] Ex2010 EMC Initialization Fails: A re-install of Exchange - from an ELEVATED CMD PROMPT. If it added the exception, then winRM is ok now. That was part of the problem. :P From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Geoff Orlebeck Sent: Tuesday, November 26, 2013 11:16 AM To: [email protected]<mailto:[email protected]> Subject: RE: [Exchange] Ex2010 EMC Initialization Fails: I should have clarified. It stated it added the exception, but I'm still getting the same error when launching EMC. From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Geoff Orlebeck Sent: Tuesday, November 26, 2013 8:12 AM To: [email protected]<mailto:[email protected]> Subject: RE: [Exchange] Ex2010 EMC Initialization Fails: Michael: I ran the "winrm quickconfig" from the elevated cmd and it asked to create a WinRM listeneron http://*, which I told it yes and the response was it created the WinRM listener to accept WS-Man requests. Not to show my complete lack of experience, but when you say a re-install, are you referring to the WinRM component? Or the full Exchange installer? I'm not sure how to perform the reinstall of WinRM. From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Michael B. Smith Sent: Tuesday, November 26, 2013 6:01 AM To: [email protected]<mailto:[email protected]> Subject: RE: [Exchange] Ex2010 EMC Initialization Fails: Try a "winrm quickconfig" and a re-install from an ELEVATED CMD PROMPT. From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Steve Ens Sent: Monday, November 25, 2013 12:48 PM To: [email protected]<mailto:[email protected]> Subject: Re: [Exchange] Ex2010 EMC Initialization Fails: Geoff, I'm fairly certain I've had that problem with my Exchange 2010 box in the past too. Let me look at my notes and I'll get back to you. On Mon, Nov 25, 2013 at 11:43 AM, Geoff Orlebeck <[email protected]<mailto:[email protected]>> wrote: I ran this utility last week and everything came back as "passed". I'm fairly new with Exchange, I've done about 2-3 Exchange standard installs and never encountered this. The only thing different on this install than on other Exchange deploys I have performed was we modified the program files install directory from the standard "C:\Program Files\..." to the "D:\Program Files..." (as decided by higher ups than me). Normally I leave default install directory and move database/log files to data drive. I don't know if that has any bearing, but this is the first time I've installed the Exchange program files to the non-default directory. From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Candee Sent: Monday, November 25, 2013 9:37 AM To: [email protected]<mailto:[email protected]> Subject: Re: [Exchange] Ex2010 EMC Initialization Fails: Have you seen this? http://blogs.technet.com/b/exchange/archive/2010/12/07/3411644.aspx Worth a look. On Mon, Nov 25, 2013 at 12:30 PM, Candee <[email protected]<mailto:[email protected]>> wrote: Anything in the event logs? On Mon, Nov 25, 2013 at 11:54 AM, Geoff Orlebeck <[email protected]<mailto:[email protected]>> wrote: Hello Everyone: We are having an issue with a newly built Exchange 2010 server. Domain is one AD and one Ex2010 server. This is a newly created domain, so this is the first Exchange server in the new domain. Ex2010 server was installed using the "typical" installation option (HUB, CAS, Mailbox, Mgmt. Tools). Exchange installed without issue (or at least no visible errors from installer window). Now though, when attempting to launch EMC we are met with one of two error messages: 1) If I login with the default Administrator account it comes up with an error stating it couldn't find "DOMAIN\Administrator". 2) If I login with a different admin-level account I receive this error: "[exchangeserver.domain.org<http://exchangeserver.domain.org>] Connecting to remote server failed with the following error message: The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SupressError $true -CurrentVersion 'Version 14.3 (Build 123.4)". I saw a suggestion about disjoining/rejoining the domain, so I gave that a shot without success. I bounced both servers and tried accessing EMC after they both came back from the clean restarts. The other oddity is using the built-in "Administrator" account everything (seemingly) works from EMS. I am able to (seemingly) perform any/all functions from the shell, but EMC continues to give the error message about being unable to find "DOMAIN\Administrator". If I login as the other admin account, I get error #2 from above for both EMS and EMC. Any suggestions would be met with great appreciation. Thank you. -Geoff This message and any attached documents may be privileged or confidential and contain information protected by state and federal privacy statutes. They are intended only for the use of the addressee. If you are not the intended recipient, any disclosure, copying, or distribution of this information is strictly prohibited. If you received this transmission in error, please accept our apologies and notify the sender. This message and any attached documents may be privileged or confidential and contain information protected by state and federal privacy statutes. They are intended only for the use of the addressee. If you are not the intended recipient, any disclosure, copying, or distribution of this information is strictly prohibited. If you received this transmission in error, please accept our apologies and notify the sender. This message and any attached documents may be privileged or confidential and contain information protected by state and federal privacy statutes. They are intended only for the use of the addressee. If you are not the intended recipient, any disclosure, copying, or distribution of this information is strictly prohibited. If you received this transmission in error, please accept our apologies and notify the sender. This message and any attached documents may be privileged or confidential and contain information protected by state and federal privacy statutes. They are intended only for the use of the addressee. If you are not the intended recipient, any disclosure, copying, or distribution of this information is strictly prohibited. If you received this transmission in error, please accept our apologies and notify the sender. This message and any attached documents may be privileged or confidential and contain information protected by state and federal privacy statutes. They are intended only for the use of the addressee. If you are not the intended recipient, any disclosure, copying, or distribution of this information is strictly prohibited. If you received this transmission in error, please accept our apologies and notify the sender. This message and any attached documents may be privileged or confidential and contain information protected by state and federal privacy statutes. They are intended only for the use of the addressee. If you are not the intended recipient, any disclosure, copying, or distribution of this information is strictly prohibited. If you received this transmission in error, please accept our apologies and notify the sender. This message and any attached documents may be privileged or confidential and contain information protected by state and federal privacy statutes. They are intended only for the use of the addressee. If you are not the intended recipient, any disclosure, copying, or distribution of this information is strictly prohibited. If you received this transmission in error, please accept our apologies and notify the sender.
