I'm curious if the below methodology applies to Exchange 2010 as well (removing OWA/ECP/EWS directories so external CAS is ActiveSync only)?
Thanks. From: [email protected] [mailto:[email protected]] On Behalf Of ccollins9 Sent: Friday, May 09, 2014 8:34 AM To: exchange Subject: Re: [Exchange] CAS exposure - Exchange 2013 SP1 With EX2013 CAS, all client connectivity is over port 443, so that's nice because there is no need to open RPC, etc., all which I'm sure you know. I would leave the CAS in the internal network and just open port 443 to it. There is no real security threat unless MS has unpatched vulnerabilities in IIS/Exchange. The second best option is to use either NAT or a reverse proxy in front, or in our case, load balancers that can do reverse proxy. I agree with Jim, it sounds like you have some old school thinking running around there that any and all internet accessible servers must be in DMZ no exceptions. Where I am, we have three CAS servers in the same internal AD site. Two service the internal and one services external connections. In the load balancer we have mail.domain.com<http://mail.domain.com> that points to the two internal CAS and mobile.domain.com<http://mobile.domain.com> that points to the one CAS for external. Our external CAS does ActiveSync only, so we removed all OWA/ECP/EWS virtual directories from that one externally accessible CAS server. Maybe someone can weigh in why this is a bad idea, but we were able to get the security team to sign off on it. On Fri, May 9, 2014 at 11:17 AM, Kennedy, Jim <[email protected]<mailto:[email protected]>> wrote: "A reverse proxy is not wanted..." I have to ask why because in my mind that is the best thing to do in this situation. If they won't allow access to 443 from the outside to a specific location why have an internet connection? "....and NAT through the firewall to the CAS array is deemed too dangerous. " And again why, because that would be the second best solution imho. This sounds like predisposed beliefs that exposing Exchange OWA to the world is dangerous. Back in 5.5 days I would have been on that page but I don't think that is the case now. "...for the single CAS in the DMZ." And this sounds like the worst idea of them all. You will have lots of ports open from the CAS to the internal to make that CAS work. So now that box gets popped out there and the bad guy now has the whole world of all the AD ports at their disposal to your internal network. Be interesting to see what my learned colleges here on the list think. But the above is what I am going with. From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Tommy Fudge Sent: Friday, May 9, 2014 11:08 AM To: [email protected]<mailto:[email protected]> Subject: [Exchange] CAS exposure - Exchange 2013 SP1 Morning, My work is concerned about exposing our CAS array to the public internet. Initial thoughts are to place a single CAS in the DMZ with ports open to our internal network. I have obvious concerns with this approach, but it is gaining traction, so I need to know if this will even work. On our internal network are two AD sites, each site contains 2 CAS and 2 MBX (single DAG) and each has independent internet connectivity. Varying thoughts are floating around such as using mail.domain.com<http://mail.domain.com> for the internal CAS array, and mobile.domain.com<http://mobile.domain.com> for the single CAS in the DMZ. Autodiscover will point to "mail" which should allow internal clients to auto configure. There is no desire for external clients to auto configure (or even laptops to function out of the office using Outlook Anywhere). Mobile devices would be statically configured to use the "mobile" namespace by IT, and external clients would connect to OWA via "mobile" as well. A reverse proxy is not wanted, and NAT through the firewall to the CAS array is deemed too dangerous. I know the single CAS is a hole in the firewall anyway and also unsupported by MS, but would this scenario even work? Is there any impact to Outlook clients on the internal network seeing the CAS in the DMZ? Would I need to make the internal CAS array non internet-facing and the single DMZ based CAS internet-facing? Can a single AD site support both internet-facing and non facing CAS? Definitely open to suggestions here. This is not production yet - no coexistence as we use an old Linux mail server right now. Thanks, Tommy Confidentiality Notice: This is a transmission from Community Hospital of the Monterey Peninsula. This message and any attached documents may be confidential and contain information protected by state and federal medical privacy statutes. They are intended only for the use of the addressee. If you are not the intended recipient, any disclosure, copying, or distribution of this information is strictly prohibited. If you received this transmission in error, please accept our apologies and notify the sender. Thank you.
