Well, in the end I managed to get it working, although it may have been as a result of other things I did along the way rather than the last things listed here; Re: Exmerge - I was running from the server, and this wasn't working. Run from any Win2k client with Outlook, and it was fine. All mailboxes exported, although I didn't need this fix in the end When installing Exchange Server, at the point of specifying an existing server, I was using the IP add rather than the Netbios name. When I used the Netbios name, all was well, it didn't fall over at the end with a MAPI communication error Thanks for the help and advice -----Original Message----- From: Niki Blowfield Sent: 07 September 2001 08:45 To: Exchange Discussions Subject: RE: Exch 5.5 installation problem Hi We have Trend Server Protect and Scanmail. Stopped all services, and re-tried, but same error Thanks for the help. Any further ideas? Nik -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: 06 September 2001 21:19 To: Exchange Discussions Subject: RE: Exch 5.5 installation problem Are there any anti=virus programs running on the server? If so stop them and re-try. Eric On Thu, 6 Sep 2001 21:16:47 +0100 , "Exchange Discussions" <[EMAIL PROTECTED]> wrote: > At the moment, I'm trying to add another server on the same subnet > across a 100mb switched LAN > > The connection between sites will be 512k ADSL, but that's another > issue > > At the moment, I just need to be able to add a server in any way > possible, or extract the mailboxes so I can start again > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] > Sent: 06 September 2001 19:56 > To: Exchange Discussions > Subject: RE: Exch 5.5 installation problem > > > What bandwidth do you have between the remote offices and the main > site? An Exchange 5.5 "site" is called a "site" for a reason. > Intra-site communication is intensive and requires a nice pipe. > > Eric > > On Thu, 6 Sep 2001 11:39:57 +0100 , "Exchange Discussions" > <[EMAIL PROTECTED]> wrote: > > > Hi > > > > We have a single Site/Server setup currently, and are looking to add > > some additional servers to the site, to be based at remote offices. > > > > Problem is, we cant get a successful installation. It always fails > > towards the end with the following message; > > > > some replication operations were not completed. directories will be > > updated during normal replication updates....etc > > > > Event viewer says; > > > > Unexpected error <<0xc0040000 - Network problems are preventing > > connection to the Microsoft Exchange Server computer. Contact your > > system administrator if this condition persists. MAPI was unable to > > load the information service emsabp.dll. Be sure the service > > is correctly installed > > and configured. Microsoft Exchange Address Book ID no: > > 00040380-0000-00000000>> occurred. > > > > I've run a search on the drives on the Exchange Server, and cant > > find > > that file at all. > > > > I've checked both the Directory and Directory Synch Services are > > running, but none made a difference. > > > > Name resolution is handled by WINS, and seems fine. I can ping back > > and forwards between the servers using their Netbios names and IP > > adds, I have tried the rpcpings programme, and all seems well, and I > > have checked the relevant technet documents relating to this error. > > > > I've had a similar errors on one installation, which instructed me > > to > > Check Knowledge Consistency on the Directory service, which said it > > found errors, and corrected them. > > > > I've just applied SP3, which made no difference. A few weeks ago we > > were forced to change the admin password (which is also the service > > account password for exchange) although we updated all the services > > (but nothing else) and all seemed well. Exchange itself seems to > > work fine. > > > > I've considered using Exmerge off the reskit to export all the > > mailboxes top PST, and start afresh, but it keeps telling me it > > doesn't have permission to access the message store (MSEMS) > > > > I'm pretty sure Ive checked all the permissions tabs, and all seems > > well. > > > > I'm getting kind of desperate now, and need some kind of solution, > > no > > matter how long winded it might seem, regarding re-installs etc. > > > > Regards > > > > Nik > > > > _________________________________________________________________ > > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > > Archives: http://www.swynk.com/sitesearch/search.asp > > To unsubscribe: mailto:[EMAIL PROTECTED] > > Exchange List admin: [EMAIL PROTECTED] > > _________________________________________________________________ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin: [EMAIL PROTECTED] > > _________________________________________________________________ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin: [EMAIL PROTECTED] _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED]