Hi List, I am hoping some of you have some insight on a problem I am having. The scenario is as follows:
The network is win2k native mode, sp2, with two domain controllers. I currently have Exchange 5.5, SP4 on a Win2k domain controller (was also a GC until last weekend) with 150 users. I have set up a Exchange 2000 on another server (non-DC) after running forest prep and domain prep. I installed the Exchange 2000 ADC. I installed win2k sp1, I joined the existed org during installation. The problem is I cannot mount the information store on the win2k Exchange server, and therefore I cannot move any mailboxes. I get an 9175 error every minute on the exchange 2k server, an 8213 every 25 minutes, mixed in with some 101's after a reboot. On the existing 5.5 server I get some 565 security errors - Directory service access errors. Both the 5.5 and 2000 admin consoles know of the other server's existence. I have poured over Technet and found some interesting stuff - most of the changes were of no help. However, Q275127 mentions no upgrade path for 5.5 on win2k to exchange 2000 (that's why I demoted the 5.5 GC status, waited a day, and rebooted). At this point I am considering opening a ticket with MS and/or running dcpromo to demote the 5.5 server. Any suggestions or comments are welcome. Timothy J. Hooks, MCSE Kegler, Brown, Hill & Ritter 65 E. State Street, Suite 1800 Columbus, Ohio 43215 _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED]
