What I did was using the perf2mib util which came with the NT4 resource kit
and played with it in the lab. (definatly not a production server).  Also I
tested it with a W2k server and E2k running on it and I was able to read
some of the performance counters. Of course that setup was not supported.

--------------------------
Martin Tuip
MVP Exchange
Exchange2000 List owner
www.exchange-mail.org
www.sharepointserver.com
--------------------------
----- Original Message -----
From: "Byron Kennedy" <[EMAIL PROTECTED]>
To: "Exchange Discussions" <[EMAIL PROTECTED]>
Sent: Tuesday, January 08, 2002 8:57 PM
Subject: RE: SNMP on an Exchange server.


> after a good bit of research and testing I've discovered there are
specific
> issues with exch 5.5 and win2000 snmp.  I was hoping that some others may
> have overcome these limitations [1]. Jennifer, if you have had, or know of
> any other specific successes related to my post I'd welcome your feedback.
>
> [1] thx for the tip martin ;)
>
> byron
>
> -----Original Message-----
> From: Jennifer Baker [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, January 08, 2002 10:41 AM
> To: Exchange Discussions
> Subject: RE: SNMP on an Exchange server.
>
>
> You *could* start with technet or google and then post any problems you
run
> into.
>
> -----Original Message-----
> From: Byron Kennedy [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, January 08, 2002 10:38 AM
> To: Exchange Discussions
> Subject: RE: SNMP on an Exchange server.
>
>
> has anyone been able to expose permon data to snmp for exch 5.5 running on
> win 2k?  what do i need to do to get this running.
>
> thx.byron
>
> -----Original Message-----
> From: Jennifer Baker [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, January 08, 2002 10:28 AM
> To: Exchange Discussions
> Subject: RE: SNMP on an Exchange server.
>
>
> The one file I was referring to was the one file he was asking about.
> Setting this up is not *as* painful under NT4 if your data center looks
like
> a clone farm.
>
> -----Original Message-----
> From: Ken Cornetet [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, January 08, 2002 7:38 AM
> To: Exchange Discussions
> Subject: RE: SNMP on an Exchange server.
>
>
> Having the mib isn't enough. You also need the MIB.BIN file and the
> PERFMIB.INI files as well. And they are matched - they all must come from
> the same build.
>
> Enabling SNMP reading of perfmon variables (at least under NT4/MSX5.5) is
an
> ugly and somewhat convoluted process. I once tried to build a "master" set
> of files, but I gave up after finding that lots of perfmon variables
> collided with existing MIB variable names. I tried to fix a few by hand,
but
> it just seemed like far too much work.
>
>
> -----Original Message-----
> From: Jennifer Baker [mailto:[EMAIL PROTECTED]]
> Sent: Monday, January 07, 2002 5:59 PM
> To: Exchange Discussions
> Subject: RE: SNMP on an Exchange server.
>
>
>
> Try this: http://www.robichaux.net/writing/exchange/goodies.html
> Search for MIB.
>
> -----Original Message-----
> From: Seitz, Peter [mailto:[EMAIL PROTECTED]]
> Sent: Monday, January 07, 2002 2:52 PM
> To: Exchange Discussions
> Subject: RE: SNMP on an Exchange server.
>
>
> 404
>
> -----Original Message-----
> From: Jennifer Baker [mailto:[EMAIL PROTECTED]]
> Sent: Monday, January 07, 2002 2:25 PM
> To: Exchange Discussions
> Subject: RE: SNMP on an Exchange server.
>
>
> You only need one file. This one:
> http://www.robichaux.net/files/NTexchperf.mib.zip
>
>
> -----Original Message-----
> From: John Matteson [mailto:[EMAIL PROTECTED]]
> Sent: Monday, January 07, 2002 12:23 PM
> To: Exchange Discussions
> Subject: SNMP on an Exchange server.
>
>
> Good afternoon to you all:
>
> I am in the process of building a MIB file for Exchange based on the
> PerfMon MIB from Microsoft.
>
> My question is this; do I need to customize the MIB file for the
individual
> configuration of the Exchange server (some have IMC's, others don't,
> different drive configurations, etc). OR, can I use one generic MIB file
and
> trust that the SNMP service won't choke when I rebuild MIB.BIN.
>
> John Matteson; Exchange Manager
> Geac Corporate Infrastructure Systems and Standards
> (404) 239 - 2981
> Believe nothing because it is written in books. Believe nothing because
wise
> men say it is so. Believe nothing because it is religious doctrine.
Believe
> it only because you yourself know it to be true. -- Buddha
>
>
>
> _________________________________________________________________
> List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
> Archives:               http://www.swynk.com/sitesearch/search.asp
> To unsubscribe:         mailto:[EMAIL PROTECTED]
> Exchange List admin:    [EMAIL PROTECTED]
>
> _________________________________________________________________
> List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
> Archives:               http://www.swynk.com/sitesearch/search.asp
> To unsubscribe:         mailto:[EMAIL PROTECTED]
> Exchange List admin:    [EMAIL PROTECTED]
>
> _________________________________________________________________
> List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
> Archives:               http://www.swynk.com/sitesearch/search.asp
> To unsubscribe:         mailto:[EMAIL PROTECTED]
> Exchange List admin:    [EMAIL PROTECTED]
>
> _________________________________________________________________
> List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
> Archives:               http://www.swynk.com/sitesearch/search.asp
> To unsubscribe:         mailto:[EMAIL PROTECTED]
> Exchange List admin:    [EMAIL PROTECTED]
>
> _________________________________________________________________
> List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
> Archives:               http://www.swynk.com/sitesearch/search.asp
> To unsubscribe:         mailto:[EMAIL PROTECTED]
> Exchange List admin:    [EMAIL PROTECTED]
>
> _________________________________________________________________
> List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
> Archives:               http://www.swynk.com/sitesearch/search.asp
> To unsubscribe:         mailto:[EMAIL PROTECTED]
> Exchange List admin:    [EMAIL PROTECTED]
>
> _________________________________________________________________
> List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
> Archives:               http://www.swynk.com/sitesearch/search.asp
> To unsubscribe:         mailto:[EMAIL PROTECTED]
> Exchange List admin:    [EMAIL PROTECTED]
>
> _________________________________________________________________
> List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
> Archives:               http://www.swynk.com/sitesearch/search.asp
> To unsubscribe:         mailto:[EMAIL PROTECTED]
> Exchange List admin:    [EMAIL PROTECTED]
>
> _________________________________________________________________
> List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
> Archives:               http://www.swynk.com/sitesearch/search.asp
> To unsubscribe:         mailto:[EMAIL PROTECTED]
> Exchange List admin:    [EMAIL PROTECTED]
>


_________________________________________________________________
List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
Archives:               http://www.swynk.com/sitesearch/search.asp
To unsubscribe:         mailto:[EMAIL PROTECTED]
Exchange List admin:    [EMAIL PROTECTED]

Reply via email to