XADM: Setting TCP/IP Port Numbers for Internet Firewalls (Q148732) ----- Original Message ----- From: "McCready, Robert" <[EMAIL PROTECTED]> To: "Exchange Discussions" <[EMAIL PROTECTED]> Sent: Thursday, April 18, 2002 8:41 AM Subject: OWA Ports
> Exchange 5.5, NT 4.0. > > OK. We are using OWA. Apparently, each time the Exchange Server is > rebooted, it randomly assigns > ports for the directory and information store by default, therefore, the > ports that the client will use must > be statically mapped. Following the OWA instructions, I made the following > registry entry to TRY and > accomplish the static mapping..... > > HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange > ServerDS\Parameters: > > From here, I selected EDIT - NEW - DWORD VALUE. I then typed in TCP/IP port > for the ENTRY and > typed the port number in under VALUE. I also did the same for > > HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MS Exchange > ServerIS\ParametersSystem: > > However, each time I reboot, a new port number is assigned. Has anybody > else had this problem? > > Thanks. > > Robert > > _________________________________________________________________ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin: [EMAIL PROTECTED] > _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED]
