E2K is on SP2, and ADC is working, here's the NDR message:
Your message did not reach some or all of the intended recipients. Subject: test Sent: 7/05/2002 4:55 PM The following recipient(s) could not be reached: Felix Doctora on 7/05/2002 4:55 PM The e-mail address could not be found. Perhaps the recipient moved to a different e-mail organization, or there was a mistake in the address. Check the address and try again.The MTS-ID of the original message is:c=US;a= ;p=company;l=Server-020507085442Z-1 MSEXCH:MSExchangeMTA:SPIDER:SERVER What does the NDR say? Is ADC working? Can you confirm E2K is on sp2? (I think you can force an NDR from the X400 queues in Exchange System Manager) William -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, May 07, 2002 12:52 AM To: Exchange Discussions Subject: can't send email from e2k to 5.5 in the same site. All, why i can't send mail using outlook 2000 from E2K server to 5.5 server in the same site. but if i send from 5.5 server to e2k using also the outlook 2000 mail can pass through without any problem. i dont have any problem if i use outlook express to send email from e2k to 5.5. event 290 are logged; category: X.400 service. source:MsExchangeMTA any ideas? regards, jojo _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED]
