Very good answers!!  Glad to have you on board and willing to share...

Thanks

Ron

-----Original Message-----
From: RB [mailto:[EMAIL PROTECTED]]
Sent: Friday, May 10, 2002 6:43 AM
To: Exchange Discussions
Subject: Re: Site connectors in Ex.5.5. & Ex2000


In the absence of the test lab and a white board I will have a go for you
but these two recommendations are valid.

By the way this is my first go at helping this list out so bear with me...

Answers below> hope they help you.

Alec

> Question:   1.   Should I install SP6a prior to the upgrade?  
> 
>>Yes I would recommend it if you have other Exchange 5.5 servers as there
are >>documented issues regarding move mailbox wizard. You may use this to
move >>mailboxes to you E2k servers.

> Situation:   Second step is to install the ADC on my W2k server and
install
> 1st Exchange 2000 server into my 5.5 site.

>>K'

>                  I have a site connector to another site in ex5.5.
> 
>                  1.   Will I have to rebuild that site connector at that
> time, or, only when I replace all my 5.5 servers in the site?

>>Only when you replace the servers responsible for the site connectivity
>>between those two sites (i.e if you have specified bridgehead servers)
Check >>the general and target servers tab in you site connectors.

>                  2.   Will it stay in-place until I remove the 1st server
in
> my ex.5.5 site?

>>Depends on whether it is the only server responsible for intersite
>>connectivity (see above answer)

>                  3.   Will I need to create a connection agreement between
> the other site and my AD?

>>Yes, the recommended model is that there is a set of connection
agreements >>per exchange 5.5 site. For example the recipient connection
agreement looks >>in the recipients container and you have one of these
per site.

_________________________________________________________________
List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
Archives:               http://www.swynk.com/sitesearch/search.asp
To unsubscribe:         mailto:[EMAIL PROTECTED]
Exchange List admin:    [EMAIL PROTECTED]

_________________________________________________________________
List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
Archives:               http://www.swynk.com/sitesearch/search.asp
To unsubscribe:         mailto:[EMAIL PROTECTED]
Exchange List admin:    [EMAIL PROTECTED]

Reply via email to