Hi Everyone,
I managed to get the Server back in the MTA queue however I still can't send mail to the server that I was having problems with previously. I noticed the message (below) in the Event log. I'm not sure how to change the port referred to. Any ideas? Regards Tony Event Type: Error Event Source: MSExchangeDS Event Category: LDAP Interface Event ID: 1306 Date: 6/22/2002 Time: 12:21:02 PM User: N/A Computer: SYDNEY2 Description: Register LDAP protocol failed with error 10048. If port number 389 is used by another application, change to an unused port, then shut down and restart Microsoft Exchange Directory Services. Contact Microsoft Support Service if condition persists. ---------------------------------------------------------------------------- -- I need some urgent help on this one because I'm supposed to move my mailboxes over to a new server today. My problem is with 2 servers in the same Exch 5.5 site. They are actually in the same room so have 100Mbps connectivity between them. The new Exch server (server2) is destined to replace the old Exch 5.5 server (server1). Until yesterday mail flowed freely between the 2 servers. The new server has been up and running for 3 months but only has a few mailboxes and public folders homed on it. Server2 has no X400 connectors and has merely been homing a few mailboxes until I've had the opportunity to decommission server1 and commission server2 as the first site server. Yesterday I had to change the IP addresses of all servers and other devices due to an Internet bandwidth upgrade (new ISP etc). There has been no trouble with server1 however the mail flow to server2 has stopped. Server2 appear in server1's MTA queue but not vice versa. I've changed the IP addresses of X400 stacks etc on server2 and there has been no issues with connectivity to other sites. There have been no useful error messages in the event log that I can find. The only real problem is this intra site issue. I would appreciate any advice re the above. Regards Tony _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED]
