I may be the DLT driver. ----- Original Message ----- From: "Pfefferkorn, Pete (PFEFFEPE)" <[EMAIL PROTECTED]> To: "Exchange Discussions" <[EMAIL PROTECTED]> Sent: Monday, November 18, 2002 4:06 PM Subject: Off topic DLT 7000 restore.
> Somewhat off topic. > > We recently upgraded our servers to Windows 2000 server with SP3 running > Exchange 5.5 SP5. The systems have DLT 7000's attached to them and I have a > recovery server that I use for restoration that also has a DLT 7000. > > After upgrading the boxes to 2000 SP3 (including my recovery box), the > backup tape drive on the recovery system will not recognize the any tapes > from the other systems. I put the tape in and I get use cleaning tape. > Looked at drivers and they are the same. Rebuilt the system twice now no > luck. I'm using an Adaptec driver and I lowered the speed to 20 and that > didn't do it. I verified both systems are at the same service pack. My > test box is pretty old, but it worked with NT. I took the tapes back over > to the production box, and it see's them fine. If I take some older tapes > and put them in, the DLT 7000 at least recognizes that there is old tape and > allows me to format them. > > Any ideas would be appreciated. > > _________________________________________________________________ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin: [EMAIL PROTECTED] > _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED]
