All, I recently moved my exchange server over to new hardware which had the following specs:
NT4 Server with service pack 5 Exchange 5.5 with service pack 3 I decided to upgrade the service packs to NT4 SP6 and exchange sp 4. SP6 installed no problem, but when I tried installing SP4, it basically failed although certain files were upgraded and changed. At this point I tried installing the Groupshield software, but that failed. In the end I reinstalled SP3 for exchange and successfully installed Groupshield. Ever since then I have noticed that the memory usage on the store has been creeping up. I also noticed that the store.exe is from my SP4 exchange. I know there is a hotfix for the store in SP4. I imagine that my exchange server is now a mixture of SP3 and SP4. I would appreciate your views on whether I should take the STORE.EXE and the EMSMDB32.DLL from the SP3 and replace it on my exchange server. I hope this would fix my initial problem with the memory leak on the STORE. I can then try and figure out why the SP4 did not work out. Thanks, Didy uop Guildford IT Tel: +44 1483 466107 E-mail: <mailto:[EMAIL PROTECTED]> > CONFIDENTIALITY NOTICE This e-mail message (including any attachments) is intended for the addressee(s) only, and may contain confidential information. The unauthorised use, disclosure or copying of this e-mail or any information contained within it is strictly prohibited and may be illegal. If you are not the intended recipient, please notify the author and delete this e-mail immediately in its entirety. _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED]
