Assuming you have an NT4 domain infrastructure yes. On 2/20/03 10:23, "Pfefferkorn, Pete (PFEFFEPE)" <[EMAIL PROTECTED]> wrote:
Exchange 5.5 SP4 We have a backup recover system we built to recover mailboxes. It's running 2000 and we have been able to restore to it, but we have had two occurrences when we told NT backup to restore to the our backup system, but the back started shutting down services on the originating system and trying to restore the Dir.EDB to the originating system. I know I didn't tell it to restore the Dir but only the info store, so I'm at a loss as to why it tried to restore back to the originating. This happened one other time as well. So what I would like to do to insure this does not happen again, is to restore to the local box without it being on the wire and insure it's not going back to the originating. My problem is that even though the tape drive is on the box it will not restore if I unplug it from the wire. Do I need to get a BDC and that box on a hub and then disconnect the hub from the wire for it to restore? Pete Pfefferkorn Senior Systems Engineer/Mail Administrator University of Cincinnati 51 Goodman Street Cincinnati, OH 45221 Phone - (513) 556-9076 Fax - (513) 556-2042 _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED]
