I've come across this before and for me it was a faulty switch on my LAN. Is there any chance you could but the machines on to a hub and try it? It may be a shot in the dark...but worth a stab.
k -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Niki Blowfield Sent: 01 July 2003 08:38 To: Exchange Discussions Subject: RE: Cannot Join Existing Site - Exch5.5 - RPCPing gurus? Hi Thanks for the responses "Any of these servers multi-homed?" No, but the 2 existing servers that are already in the Exchange Site have 2 network adapters and the Compaq teaming drivers installed "Also, I know you say DNS is working, but try putting all the respective entries in all the server's hosts files." Tried putting all three servers (2 existing and 1 new) into each others lmhosts and hosts, imported lmhosts, rebooted, problem persists "Verify that you can resolve the hostname properly through both WINS and DNS." Are you referring to any other means other than pinging the netbios then the full hostname? Thanks for any further advice Regards, Mr. Niki Blowfield NT Administrator Extension 482 Martin-Baker Aircraft Company Ltd. Lower Road Higher Denham near Uxbridge Middlesex UB9 5AJ England Tel : 01895 836 760 Fax : 01895 832 587 -----Original Message----- From: Andy David [mailto:[EMAIL PROTECTED] Sent: 30 June 2003 16:59 To: Exchange Discussions Subject: Re: Cannot Join Existing Site - Exch5.5 - RPCPing gurus? Any of these servers multi-homed? Also, I know you say DNS is working, but try putting all the respective entries in all the server's hosts files. ----- Original Message ----- From: "Niki Blowfield" <[EMAIL PROTECTED]> To: "Exchange Discussions" <[EMAIL PROTECTED]> Sent: Monday, June 30, 2003 5:57 AM Subject: Cannot Join Existing Site - Exch5.5 - RPCPing gurus? > Dear All, > > This is a problem I had at my previous employer, and I got around it > by temporarily removing DNS whilst joining the site, this isnt working > here > > We have 2 Exchange Servers on our private LAN. One has mailboxes, one > has IMC. Both Exch 5.5 SP4 > > Running on NT4 SP6a with only TCP/IP installed > > Both point to DNS and WINS servers on the same LAN address range > > There are no problems communicating between the 2 servers > > However, when attempting to join a 3rd server to the site, it fails at > the point of running setup where it starts to make a copy of the > directory, saying; > > "A connection could not be made to the remote directory service, > possibly due to a network failure. Be sure both directory services are > running and that your network is available and running and then > try again. > > Microsoft Exchange Setup Error: c1030b11 " > > I've gone through the technet docs ensuring as best I can that comms > are ok. > Ping is fine, and I'm able > to browse each server fine > > However, running RPCPing fails > > When running RPCPing32 from the new server (MBEXCH3) to an existing > one > (MBEXCH2) it fails and reports; > > RPC call raised exception 0x6ba - The server is unavailable > > RPC service is running on all servers > > Cant find any documentation on troubleshooting RPC Ping errors > > help !!!!!!!!!!!!! > > > > Regards, > > Mr. Niki Blowfield > NT Administrator > Extension 482 > > Martin-Baker Aircraft Company Ltd. > Lower Road > Higher Denham > near Uxbridge > Middlesex > UB9 5AJ > England > > Tel : 01895 836 760 > Fax : 01895 832 587 > > _________________________________________________________________ > Hotmail messages direct to your mobile phone http://www.msn.co.uk/msnmobile > > > _________________________________________________________________ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&; lang =english > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin: [EMAIL PROTECTED] > _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&; lang =english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] ------------------------------------------------ This Email together with any attachments is confidential and intended solely for the person to whom it is addressed. The unauthorised use, distribution, copying or alteration of the e-mail is forbidden and may be unlawful. If you have received the same in error, please advise the sender immediately by returning the e-mail and then delete it from your system. As Internet communications are not secure, Martin-Baker Aircraft Company Limited does not accept legal responsibility for the contents of this e-mail or attachments. Furthermore, you should carry out such virus and other checks as considered appropriate to ensure that the opening and/or use of this e-mail and any attachments does not adversely affect other systems or data, for which Martin-Baker Aircraft Company Limited can accept no legal responsibility. _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&; lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED]
