If you have a true cloud and no backup links, then I would think that you'd make one site link for all the sites connected to the cloud.
As to Exchange routing group connectors, I would set up standard routing group connectors (not SMTP Connectors) between the sites according to predominant mail flow. There's no reason you couldn't set up a full mesh, either. In fact, I'm not so sure you really need separate routing groups at all given your WAN bandwidth, however, what really matters is available capacity, not raw capacity. Ed Crowley MCSE+Internet MVP Freelance E-Mail Philosopher Protecting the world from PSTs and Bricked Backups!T -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Miller, Robert Sent: Monday, October 13, 2003 11:00 AM To: Exchange Discussions Subject: RE: Exchange 2000 Routing Each office/location is in it's own Site. I have 4 Site Links (1 for all the North and South America offices - 1 for the European offices, 1 for the Asia Pac offices, and then 1 that ties the other 3 together). The Site Link bridgeheads are the servers in the 3 Hubs. > -----Original Message----- > From: Ed Crowley [MVP] [mailto:[EMAIL PROTECTED] > Sent: Monday, October 13, 2003 12:32 PM > To: Exchange Discussions > Subject: RE: Exchange 2000 Routing > > > How are your AD sites configured? > > Ed Crowley MCSE+Internet MVP > Freelance E-Mail Philosopher > Protecting the world from PSTs and Bricked Backups!T > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Miller, > Robert > Sent: Monday, October 13, 2003 10:09 AM > To: Exchange Discussions > Subject: Exchange 2000 Routing > > All, > > We have a fully meshed network (IP Cloud) connecting 65 offices around > the world. We are currently in the process of moving from 5.5 to 2000. > We have 3 main HUB sites (Chicago, London, Hong Kong). The hubs have > the biggest pipes into the cloud (Chicago - 4MB, London 2MB, Hong Kong > 2MB). > All other offices > range from 65K to 512K. Looking for ideas on how to setup the SMTP > connectors between the routing groups (each office, including the hubs > - are in their own routing group. 2 ideas so far 1. 3 Hubs meshed with > SMTP connectors - each remote office with 3 SMTP connectors - 1 > connector with the lowest cost going to Chicago, and then the other 2 > connectors with a higher cost to London and Hong Kong (this would > force all traffic through Chicago which has the biggest pipe and have > London and Hong Kong for redundant paths. > 2. 3 Hubs meshed with SMTP connectors - each remote office with 3 SMTP > connectors - 1 connector with the lowest cost going to its respective > hub site (example - Dallas office to Chicago, Paris to London)... > and then 2 > connectors with a higher cost to London and Hong Kong. > > Our WAN team wants us to create a routing topology so that any office > can send email directly to any other office - this would require over > 4000 connectors. > > Any thoughts? > > TIA, > > _________________________________________________________________ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Web Interface: > http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&t ext_mode=&lang =english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang =english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang =english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED]
