On 24 Feb 2010, at 22:54, Phil Pennock wrote:
> On 2010-02-24 at 19:10 +0000, Jonathan Gilpin wrote:
>> On 24 Feb 2010, at 18:51, Phil Pennock wrote:
>>
>>> On 2010-02-24 at 18:16 +0000, Jonathan Gilpin wrote:
>>>> I'm not using smtp... I have a catchall alias of *...@domain going to a
>>>> maildir. I then end up with a message with two addresses in the
>>>> Envelope-To: E.G
>>>
>>> So can you *please* provide the relevant configuration (Router and
>>> Transport) so that we have something to look at and work from to
>>> diagnose the problem, instead of working blind?
>>
>> For the routers I have:
>
> [ Snip 4 routers, none of which is the Router causing the problem ]
>
>> A mail to: [email protected] and [email protected] both if which do not exist
>> are caught by the catchall, one email is delivered as shows in the logs:
>>
>> 2010-02-24 18:15:02 1NkLlE-000AJ2-Pu SA: Action: scanned but message isn't
>> spam: score=2.9 required=4.0 (scanned in 2/2 secs | Message-Id:
>> [email protected]). From
>> <[email protected]> (local) for [email protected], [email protected]
>> 2010-02-24 18:15:02 1NkLlE-000AJ2-Pu => postmaster <[email protected]>
>> R=virtual_local_mailbox T=virtual_local_md_delivery
>
> Okay, so you've rewritten the recipient in another Router which you
> haven't shown us. Two of the SMTP RCPT recipients have been rewritten
> to the same SMTP recipient, and Exim is not delivering twice to the
> *same* recipient, as routed.
>
> This is a very different problem to the one described.
>
> Your catchall is causing you to only try to deliver one copy.
>
> Instead of using a catchall "redirect" router, use a catchall "accept"
> router, which stores the mail in the catchall folder directly, but
> routed for the original address.
Hi, I am using an accept not a redirect. I have included the full config below.
Hope you can spot something...
######################################################################
# MAIN CONFIGURATION SETTINGS #
######################################################################
# MySQL defines
MYSQL_SERVER=localhost
MYSQL_USER=mailnull
MYSQL_PASSWORD=******
MYSQL_DB=exim
MYSQL_EMAILTABLE=emailtable
MYSQL_DOMAINTABLE=domaintable
MYSQL_DOMAINRTABLE=relaytable
MYSQL_WHITETABLE=whitelist
MYSQL_BLACKTABLE=blacklist
MYSQL_AUTHTABLE=emailtable
local_interfaces = /snipped/
# MySQL queries
MYSQL_Q_ISAWAY=SELECT domain FROM MYSQL_EMAILTABLE WHERE
domain='${quote_mysql:$domain}' AND local_part='${quote_mysql:$local_part}' AND
is_away='yes'
MYSQL_Q_AWAYTEXT=SELECT away_text FROM MYSQL_EMAILTABLE WHERE
domain='${quote_mysql:$domain}' AND local_part='${quote_mysql:$local_part}'
MYSQL_Q_FORWARD=SELECT forward FROM MYSQL_EMAILTABLE WHERE
domain='${quote_mysql:$domain}' AND local_part='${quote_mysql:$local_part}' AND
forward != ''
MYSQL_Q_CC=SELECT cc FROM MYSQL_EMAILTABLE WHERE
domain='${quote_mysql:$domain}' AND local_part='${quote_mysql:$local_part}'
MYSQL_Q_ALIASES=SELECT substring(address, locate('@', address) +1) FROM
MYSQL_EMAILTABLE,aliases WHERE emailtable.email = aliases.destination and
(aliases.address = '${quote_mysql:$local_pa...@${quote_mysql:$domain}' or
aliases.address = '*...@${quote_mysql:$domain}')
#MYSQL_Q_ALIASES=SELECT destination FROM MYSQL_EMAILTABLE,aliases WHERE
emailtable.email = aliases.destination and (aliases.address =
'${quote_mysql:$local_pa...@${quote_mysql:$domain}' or aliases.address =
'*...@${quote_mysql:$domain}')
MYSQL_Q_LOCAL=SELECT domain FROM MYSQL_EMAILTABLE WHERE
domain='${quote_mysql:$domain}' AND (local_part='${quote_mysql:$local_part}' or
local_part='*') AND mail != ''
MYSQL_Q_WCLOCAL=SELECT domain FROM MYSQL_EMAILTABLE WHERE
domain='${quote_mysql:$domain}' AND local_part='*' AND forward != ''
MYSQL_Q_WCLOCFW=SELECT forward FROM MYSQL_EMAILTABLE WHERE
domain='${quote_mysql:$domain}' AND local_part='*' AND forward != ''
MYSQL_Q_LDOMAIN=SELECT DISTINCT domain FROM MYSQL_DOMAINTABLE WHERE
domain='$domain'
MYSQL_Q_RDOMAIN=SELECT DISTINCT domain FROM MYSQL_DOMAINRTABLE WHERE
domain='$domain'
MYSQL_Q_RELAYIP=SELECT ip from relayhosts
MYSQL_Q_BOXNAME=SELECT mail FROM MYSQL_EMAILTABLE WHERE
domain='${quote_mysql:$domain}' AND (local_part='${quote_mysql:$local_part}' or
local_part='*')
MYSQL_Q_ABOXNAME=SELECT mail FROM MYSQL_EMAILTABLE,aliases WHERE
emailtable.email = aliases.destination and
(aliases.address='${quote_mysql:$local_pa...@${quote_mysql:$domain}' or
aliases.address = '*...@${quote_mysql:$domain}')
MYSQL_Q_SPAMC=SELECT domain FROM MYSQL_EMAILTABLE WHERE
domain='${quote_mysql:$domain}' AND (local_part='${quote_mysql:$local_part}' or
local_part='*' ) AND opt_spamscan='yes'
MYSQL_Q_ASPAMC=SELECT substring(address, locate('@', address) +1) FROM
MYSQL_EMAILTABLE,aliases WHERE emailtable.email = aliases.destination and
(aliases.address = '${quote_mysql:$local_pa...@${quote_mysql:$domain}' or
aliases.address = '*...@${quote_mysql:$domain}') AND opt_spamscan='yes'
#MYSQL_Q_ASPAMC=SELECT destination FROM MYSQL_EMAILTABLE,aliases WHERE
emailtable.email = aliases.destination and (aliases.address =
'${quote_mysql:$local_pa...@${quote_mysql:$domain}' or aliases.address =
'*...@${quote_mysql:$domain}') AND opt_spamscan='yes'
MYSQL_Q_VSCAN=SELECT domain FROM MYSQL_EMAILTABLE WHERE
domain='${quote_mysql:$domain}' AND local_part='${quote_mysql:$local_part}' AND
opt_virscan='yes'
MYSQL_Q_SPAMPURGE=SELECT domain FROM MYSQL_EMAILTABLE WHERE
domain='${quote_mysql:$domain}' AND (local_part='${quote_mysql:$local_part}' or
local_part='*') AND opt_spampurge='yes'
#MYSQL_Q_DISCLAIMER=SELECT domain FROM MYSQL_EMAILTABLE WHERE
domain='${quote_mysql:$domain}' AND (local_part='${quote_mysql:$local_part}' or
local_part='Postmaster') AND disclaimer='1'
MYSQL_Q_DISCLAIMER=SELECT domain FROM MYSQL_EMAILTABLE WHERE
email='${quote_mysql:$authenticated_id}' AND disclaimer='1'
MYSQL_Q_DISABLED=SELECT domain FROM MYSQL_EMAILTABLE WHERE
domain='${quote_mysql:$domain}' AND local_part='${quote_mysql:$local_part}' AND
is_enabled='no'
MYSQL_Q_WHITELIST=SELECT DISTINCT MYSQL_WHITETABLE.address FROM
MYSQL_WHITETABLE WHERE '${quote_mysql:$sender_address}' LIKE whitelist.address
MYSQL_Q_BLACKLIST=SELECT DISTINCT MYSQL_BLACKTABLE.address FROM
MYSQL_BLACKTABLE WHERE '${quote_mysql:$sender_address}' LIKE blacklist.address
#MYSQL_Q_AUTHPWD1=SELECT concat(local_part,'@',domain) FROM MYSQL_AUTHTABLE
WHERE email ='$2' AND password='$3'
MYSQL_Q_AUTHPWD1=SELECT concat(local_part,'@',domain) FROM MYSQL_AUTHTABLE
WHERE concat(local_part,'@',domain) ='$2' AND password='$3'
#MYSQL_Q_AUTHPWD2=SELECT concat(local_part,'@',domain) FROM MYSQL_AUTHTABLE
WHERE email = '$1' AND password='$2'
MYSQL_Q_AUTHPWD2=SELECT concat(local_part,'@',domain) FROM MYSQL_AUTHTABLE
WHERE concat(local_part,'@',domain) = '$1' AND password='$2'
# MySQL connection
hide mysql_servers = "MYSQL_SERVER/MYSQL_DB/MYSQL_USER/MYSQL_PASSWORD"
# starting 'normal' config
#
#delay_warning = 0s
#deliver_queue_load_max = 99
#ignore_bounce_errors_after = 0s
#return_size_limit = 10000
#queue_only_load = 3
#queue_run_max = 5
#smtp_accept_queue = 10
#strip_trailing_dot
#split_spool_directory
#remote_max_parallel = 40
#
primary_hostname = hostname
domainlist local_domains = mysql;MYSQL_Q_LDOMAIN
pid_file_path = /var/run/exim.pid
domainlist relay_to_domains = mysql;MYSQL_Q_RDOMAIN
hostlist relay_from_hosts = ${lookup
mysql{MYSQL_Q_RELAYIP}{${sg{$value}{\\n}{ : }} }}
#mysql;MYSQL_Q_RELAYIP
domainlist noreverse = various domains
acl_smtp_rcpt = acl_check_rcpt
acl_smtp_data = acl_check_data
av_scanner = clamd:/var/run/clamav/clamd.sock
qualify_domain = fluent18.fluent.ltd.uk
# qualify_recipient =
# allow_domain_literals
smtp_accept_max = 500
never_users = root
#trusted_users = list # : amavis
trusted_users = mailnull
host_lookup = *
rfc1413_hosts = *
smtp_enforce_sync = false
rfc1413_query_timeout = 2s
check_spool_space = 50M
check_log_space = 20M
return_size_limit = 20k
message_size_limit = 20M
# sender_unqualified_hosts =
# recipient_unqualified_hosts =
# percent_hack_domains =
ignore_bounce_errors_after = 2h
timeout_frozen_after = 4d
deliver_queue_load_max = 8
queue_only_load = 10
remote_max_parallel = 15
#tls_certificate =
#tls_privatekey =
#tls_advertise_hosts = *
######################################################################
# ACL CONFIGURATION #
# Specifies access control lists for incoming SMTP mail #
######################################################################
begin acl
acl_check_rcpt:
accept hosts = :
deny domains = +local_domains
local_parts = ^[.] : ^...@%!/|]
deny domains = !+local_domains
local_parts = ^[./|] : ^...@%!] : ^.*/\\.\\./
accept local_parts = postmaster
domains = +local_domains
# deny message = Reverse DNS lookup failed for host
$sender_host_address.
# log_message = Reverse DNS lookup failed
# domains = !+noreverse
# hosts = !+relay_from_hosts
# !authenticated = *
# !verify = reverse_host_lookup
drop log_message = match sbl-xbl.spamhaus.org
!authenticated = *
dnslists = sbl-xbl.spamhaus.org
deny message = Access denied - $sender_host_address listed by
$dnslist_domain\n$dnslist_text
!authenticated = *
dnslists = dnsbl.sorbs.net
# require verify = sender
accept domains = +local_domains
endpass
verify = recipient
accept domains = +relay_to_domains
endpass
verify = recipient
deny message = $sender_host_address is not allowed to send mail from
$sender_address_domain
log_message = SPF check failed
spf = fail
accept hosts = +relay_from_hosts
accept authenticated = *
add_header = X-AuthenticatedID: $authenticated_id
add_header = X-OriginalFromAdr: $sender_address
deny message = relay not permitted
acl_check_data:
deny message = X-Quarantine-Me-Malware: $malware_name
log_message = malware: $malware_name
demime = *
malware = */defer_ok
accept
######################################################################
# ROUTERS CONFIGURATION #
# Specifies how addresses are handled #
######################################################################
# THE ORDER IN WHICH THE ROUTERS ARE DEFINED IS IMPORTANT! #
# An address is passed to each router in turn until it is accepted. #
######################################################################
begin routers
fail_router:
driver = redirect
domains = ${lookup mysql {MYSQL_Q_DISABLED}{$value}}
data = ":fail:"
allow_fail
##uncomment, if you plan to use mailman (www.list.org)
#mailman_aliases:
# driver = redirect
# allow_fail
# allow_defer
# data = ${lookup{$local_part}lsearch{/etc/aliases.mailman}}
# file_transport = address_file
# pipe_transport = address_pipe
#amavis_director:
# driver = manualroute
# domains = ${lookup mysql {MYSQL_Q_VSCAN}{$value}}
# condition = "${if or { \
# {eq{$received_protocol}{scanned-ok}} \
# {eq{$received_protocol}{spam-scanned}} \
# if you like to scan mails from localhost too, then comment the following line
(not good for big mailman lists...)
# {eq{$sender_host_address}{127.0.0.1}} \
# } \
# {0}{1}}"
# route_list = "* localhost byname"
# transport = amavis
# verify = false
#check_malware:
# driver = redirect
# condition = ${if def:h_X-Quarantine-Me-Malware: {1}{0}}
# headers_add = X-Quarantined-Malware: $h_X-Quarantine-Me-Malware:
# headers_remove = X-Quarantine-Me-Malware
# data = /var/db/malware/malware.$tod_logfile
# file_transport = address_file
check_disclaimer:
driver = dnslookup
# domains = ! +local_domains :
# domains = ${lookup mysql {MYSQL_Q_SPAMPURGE}{$value}}
# domains = ${lookup mysql {MYSQL_Q_DISCLAIMER}{$value}}
senders = ${lookup mysql {MYSQL_Q_DISCLAIMER}{$value}}
# domains = !+rfwrutherfords
transport = disclaimer_pipe
same_domain_copy_routing = yes
no_more
dnslookup:
driver = dnslookup
domains = !+local_domains
transport = remote_smtp
ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8
no_more
blacklist_router:
driver = manualroute
senders = ${lookup mysql {MYSQL_Q_BLACKLIST}{$value}}
condition = "${if !def:h_X-Spam-Flag: {1}{0}}"
headers_add = X-Spam-Flag: YES
route_list = * localhost
self = pass
system_aliases:
driver = redirect
allow_fail
allow_defer
data = ${lookup{$local_part}lsearch{/etc/aliases}}
# user = exim
file_transport = address_file
pipe_transport = address_pipe
virtual_forward_director:
driver = redirect
data = ${lookup mysql {MYSQL_Q_FORWARD}{$value}}
virtual_cc_director:
driver = redirect
data = ${lookup mysql {MYSQL_Q_CC}{$value}}
unseen
spamcheck_director:
driver = manualroute
domains = ${lookup mysql {MYSQL_Q_SPAMC}{$value}}
senders = ! ${lookup mysql {MYSQL_Q_WHITELIST}{$value}}
condition = ${if and { \
{!eq {$received_protocol}{spam-scanned}} \
{!eq {$received_protocol}{local}} \
} {1}{0}}
headers_remove = X-Spam-Flag
route_list = "* localhost byname"
transport = spamcheck
verify = false
#spamcheck_alias_director:
# driver = manualroute
# domains = ${lookup mysql {MYSQL_Q_ASPAMC}{$value}}
# senders = ! ${lookup mysql {MYSQL_Q_WHITELIST}{$value}}
# condition = ${if and { \
# {!eq {$received_protocol}{spam-scanned}} \
# {!eq {$received_protocol}{local}} \
# } {1}{0}}
# headers_remove = X-Spam-Flag
# route_list = "* localhost byname"
# transport = spamcheck
# verify = false
spampurge_director:
driver = manualroute
domains = ${lookup mysql {MYSQL_Q_SPAMPURGE}{$value}}
condition = "${if eq{$h_X-Spam-Flag:}{YES} {1}{0}}"
route_list = "* localhost byname"
transport = devnull_transport
verify = false
vacation_director:
driver = accept
domains = ${lookup mysql {MYSQL_Q_ISAWAY}{$value}}
transport = vacation_autoreply
unseen
mysql_aliases:
driver = redirect
file_transport = address_file
pipe_transport = address_pipe
data = ${lookup mysql{SELECT destination FROM aliases,emailtable WHERE
emailtable.email = aliases.destination and (aliases.address =
'${quote_mysql:$local_pa...@${quote_mysql:$domain}' or aliases.address =
'*...@${quote_mysql:$domain}')}}
spamcheck_alias_director:
driver = manualroute
domains = ${lookup mysql {MYSQL_Q_ASPAMC}{$value}}
senders = ! ${lookup mysql {MYSQL_Q_WHITELIST}{$value}}
condition = ${if and { \
{!eq {$received_protocol}{spam-scanned}} \
{!eq {$received_protocol}{local}} \
} {1}{0}}
headers_remove = X-Spam-Flag
route_list = "* localhost byname"
transport = spamcheck
verify = false
#mysql_aliases:
# driver = redirect
# file_transport = address_file
# pipe_transport = address_pipe
# data = ${lookup mysql{SELECT destination FROM aliases,emailtable WHERE
emailtable.email = aliases.destination and (aliases.address =
'${quote_mysql:$local_pa...@${quote_mysql:$domain}' or aliases.address =
'*...@${quote_mysql:$domain}')}}
#add_header = X-Envelope-To:
${quote_mysql:$local_pa...@${quote_mysql:$domain}
virtual_local_spam:
driver = accept
condition = "${if eq{$h_X-Spam-Flag:}{YES} {1}{0}}"
domains = ${lookup mysql {MYSQL_Q_LOCAL}{$value}}
transport = virtual_local_spam_delivery
virtual_local_mailbox:
driver = accept
domains = ${lookup mysql {MYSQL_Q_LOCAL}{$value}}
transport = virtual_local_md_delivery
#virtual_wclocal_redirect:
# driver = redirect
# driver = accept
# domains = ${lookup mysql {MYSQL_Q_WCLOCAL}{$value}}
# data = ${lookup mysql {MYSQL_Q_WCLOCFW}{$value}}
# transport = virtual_local_md_delivery
virtual_alias:
driver = accept
domains = ${lookup mysql {MYSQL_Q_ALIASES}{$value}}
transport = virtual_local_alias_delivery
######################################################################
# TRANSPORTS CONFIGURATION #
######################################################################
# ORDER DOES NOT MATTER #
# Only one appropriate transport is called for each delivery. #
######################################################################
begin transports
disclaimer_pipe:
driver = smtp
debug_print = "T: add_company_details_remote_smtp for $local_p...@$domain"
transport_filter = /usr/local/bin/altermime --log-syslog --input=-
--disclaimer=/usr/local/mail/disclaimers/rfwrutherfords.com.txt
--disclaimer-html=/usr/local/mail/disclaimers/rfwrutherfords.com.html
size_addition = 1
remote_smtp:
driver = smtp
# interface = 195.78.94.248
devnull_delivery:
driver = appendfile
file = /dev/null
group = mail
address_pipe:
driver = pipe
return_output
address_file:
driver = appendfile
delivery_date_add
envelope_to_add
return_path_add
address_reply:
driver = autoreply
#amavis:
# driver = pipe
# command = "/usr/sbin/amavis <${sender_address}> ${pipe_addresses}"
# message_prefix =
# message_suffix =
# check_string =
# escape_string =
## for debugging change return_output to true
# return_output = false
# return_path_add = false
# user = amavis
# group = mail
# path = "/bin:/sbin:/usr/bin:/usr/sbin"
# current_directory = "/var/amavis"
spamcheck:
driver = pipe
command = /usr/local/sbin/exim -oMr spam-scanned -bS
use_bsmtp = true
transport_filter = "/usr/local/bin/spamc"
home_directory = "/tmp"
current_directory = "/tmp"
user = mailnull
group = mail
log_output = true
return_fail_output = true
return_path_add = false
message_prefix =
message_suffix =
virtual_local_alias_delivery:
driver = appendfile
directory = ${lookup mysql {MYSQL_Q_ABOXNAME}{$value}}
maildir_format
user = mailnull
group = mail
mode = 0660
directory_mode = 0770
envelope_to_add
return_path_add
virtual_local_md_delivery:
driver = appendfile
directory = ${lookup mysql {MYSQL_Q_BOXNAME}{$value}}
maildir_format
user = mailnull
group = mail
mode = 0660
directory_mode = 0770
envelope_to_add
return_path_add
virtual_local_spam_delivery:
driver = appendfile
directory = ${lookup mysql {MYSQL_Q_BOXNAME}{$value}}/.Spam
maildir_format
user = mailnull
group = mail
mode = 0660
directory_mode = 0770
envelope_to_add
return_path_add
vacation_autoreply:
driver = autoreply
to = ${sender_address}
from = "vacat...@${domain}"
subject = "AutoResponder for ${local_pa...@${domain}"
text = ${lookup mysql {MYSQL_Q_AWAYTEXT}{$value}}
devnull_transport:
driver = appendfile
file = /dev/null
user = mailnull
######################################################################
# RETRY CONFIGURATION #
######################################################################
begin retry
# This single retry rule applies to all domains and all errors. It specifies
# retries every 15 minutes for 2 hours, then increasing retry intervals,
# starting at 1 hour and increasing each time by a factor of 1.5, up to 16
# hours, then retries every 6 hours until 4 days have passed since the first
# failed delivery.
# Domain Error Retries
# ------ ----- -------
* * F,2h,15m; G,16h,1h,1.5; F,4d,6h
######################################################################
# REWRITE CONFIGURATION #
######################################################################
# There are no rewriting specifications in this default configuration file.
begin rewrite
######################################################################
# AUTHENTICATION CONFIGURATION #
######################################################################
# There are no authenticator specifications in this default configuration file.
begin authenticators
fixed_plain:
driver = plaintext
public_name = PLAIN
server_condition = ${lookup mysql{MYSQL_Q_AUTHPWD1}{1}fail}
server_set_id = $2
fixed_login:
driver = plaintext
public_name = LOGIN
server_prompts = "Username:: : Password::"
server_condition = ${lookup mysql{MYSQL_Q_AUTHPWD2}{1}fail}
server_set_id = $1
######################################################################
# CONFIGURATION FOR local_scan() #
######################################################################
# If you have built Exim to include a local_scan() function that contains
# tables for private options, you can define those options here. Remember to
# uncomment the "begin" line. It is commented by default because it provokes
# an error with Exim binaries that are not built with LOCAL_SCAN_HAS_OPTIONS
# set in the Local/Makefile.
# begin local_scan
# End of Exim configuration file
--
## List details at http://lists.exim.org/mailman/listinfo/exim-users
## Exim details at http://www.exim.org/
## Please use the Wiki with this list - http://wiki.exim.org/
