On 6/12/2015 10:33 AM, Danielle M. wrote:
On 6/12/2015 5:04 AM, Jon Gerdes wrote:
On Thu, 2015-06-11 at 12:48 -0500, Danielle M. wrote:
On 6/11/2015 10:34 AM, Jon Gerdes wrote:
On Thu, 2015-06-11 at 10:05 -0500, Danielle M. wrote:
Hey Jon,
Thank you so much for the help. I'm relatively new to advanced Exim
configuration and am running into an error or two with your
suggestion. Exim is returning the below error when trying to set your
ACL variable in the connect area:
main option "set" unknown
As for the router condition, would it look something like this?
condition = ${if acl_c_mail_submission_port{1}}
smart_route:
driver = manualroute
domains = !+local_domains
transport = remote_smtp
route_list = * ip_address
Thank you!
Dani McLeod
On 6/11/2015 3:38 AM, Jon Gerdes wrote:
On Wed, 2015-06-10 at 17:03 -0500, Danielle M. wrote:
Trying this one more time as I do not think my first send
registered.
-- snip --
2015-06-11 12:37:41 1Z36Q9-0000fy-E3 failed to expand condition "${if
and{{bool_lax{NULL}}{bool_lax{{if
eq{$acl_c_mail_submission_port}{1}}}}}}" for smart_route router:
missing
} at end of condition inside "and" group
I've tried all of the common sense fixes I could think of (ensuring all
braces have a matching opposite brace, etc.) to no avail. To sum up
what
I've added:
---Under acl_check_connect---
warn condition = ${if ={587}{$interface_port}}
set acl_c_mail_submission_port = 1
domains = !+local_domains
accept domains = !+local_domains
---Under routers---
smart_route:
driver = manualroute
domains = !+local_domains
transport = remote_smtp
route_list = * ip_address_for_smart_host
condition = {if acl_c_mail_submission_port{1}}
no_more
Any ideas?
Thank you,
Danielle M.
Danielle
I've just tested this:
warn condition = ${if eq{$interface_port}{587}}
set acl_c_mail_submission_port = 1
domains = !+local_domains
With this:
#exim -bhc 192.168.100.11 -oMi 10.77.10.11.587
... and that works for definite!
----------- 8< ----------------
processing "warn"
check condition = ${if eq{$interface_port}{587}}
= true
check set acl_c_mail_submission_port = 1
check domains = !+internal_domains
----------- 8< ----------------
In the above exim command, 192.168.100.11 is a pretend client address,
10.77.10.11 is and exim daemon address and the .587 means to pretend
that the connection is arriving on port 587 and not 25. Note it is a .
(dot) and not a : as you would normally expect ...
Finally, the extra c (-bhc) is probably not needed in your case but I
use callout checks here and so I always put it in.
For the if syntax see:
http://www.exim.org/exim-html-current/doc/html/spec_html/ch-string_expansions.html
In this case I am using the third example:
condition = ${if >{$acl_m4}{3}}
Cheers
Jon
Blueloop Ltd
Jon Gerdes | Senior Consultant
Blueloop House
Ilchester Road
Yeovil
Somerset BA21 3AA
Tel: 2100
Web: www.blueloop.net
Registered Address : Blueloop House, Ilchester Road, YEOVIL, BA21 3AA
Registered England & Wales - 3981322
CONFIDENTIAL INFORMATION
This e-mail and any files attached with it are confidential and for
the sole use of the intended recipient(s). If you are not the
intended recipient(s) you are prohibited from using, copying or
distributing this or any information contained in it and should
immediately notify the sender and delete the message from your system.
Internet communications are not secure and Blueloop Limited is not
responsible for unauthorised use by third parties nor for alteration
or corruption in transmission. Furthermore, while Blueloop Limited
have taken reasonable precautions to minimise the risk of software
viruses, it cannot accept liability for any damage which you may
suffer as a result of such viruses, and we therefore recommend you
carry out your own virus checks on receipt of any e-mail.
Jon,
I don't know what changed, but now it works! One final thing is
hanging up when I try to send via SMTP:
2015-06-12 10:28:01 SMTP connection from [::1]:36914 (TCP/IP
connection count = 1)
2015-06-12 10:28:01 H=[::1]:36914 rejected connection in "connect" ACL
I have this in my connect ACL:
warn condition = ${if eq{$interface_port}{587}}
set acl_c_mail_submission_port = 1
domains = !+local_domains
accept domains = !+local_domains
Thank you,
Dani
Anyone on this?
--
## List details at https://lists.exim.org/mailman/listinfo/exim-users
## Exim details at http://www.exim.org/
## Please use the Wiki with this list - http://wiki.exim.org/
