> -----Original Message-----
> From: Jeremy Harris
> A ${lookup dnsdb... is the magic you need.
> http://exim.org/exim-html-current/doc/html/spec_html/ch-file_and_database_lookups.html#SECTdnsdbOK, I have replicated most of the functionality of the Perl script with the native lookup dnsdb, that Jeremy kindly suggested. It indeed works quite fine, and as expected, since two days. Although the Perl script may have some more functionality, the Exim-native solution is definitely better and cleaner. You can find the full config and description on the same, earlier mentioned GitHub page at https://github.com/truxoft/dkim_policy, and I attach the relevant Exim DKIM ACL config section below. Just a reminder for those who did not correctly understand the purpose of the feature: it helps rejecting unsigned email that comes from domains with one of the DK, DKIM or ADSP policies available in their DNS, and claiming all their email is sent exclusively signed with DKIM. There is no reason the script should reject email from domains without any policies as Richard Clayton seems to have mistakenly understood. The config follows below. I use some long lines, so they may break inadequately on some platforms. Have a look at a properly formatted version at https://github.com/truxoft/dkim_policy/blob/master/EXIM.conf # Ivo Truxa 2017-01-11 # logwrites mostly for testing and debugging purposes, enable/disable them when needed # # ---- IMPORTANT !!!! ---- # In the gkobal settings, you have to enable the DKIM ACL for all senders! # For example with the following directive: # # dkim_verify_signers = $sender_address_domain # # Also, do not forget disabling the dkim control for authorized and trusted users # and relays. Have a look ad Exim's documentation for details and examples # # The settings below use two domain lists: dkim_domains and local_domains. # The first list contains well known and/or frequently used global domains # known to be using DKIM. The second list contains all local domain names # served by our mail server, while we know we use and enforce DKIM at all of # them. Checking both lists before doing DNS lookups of policies, saves # some processing time and bandwidth. # Just setting a frequently used debugging logwrite text warn set acl_m_dklog = $dkim_verify_status, D=$sender_address_domain, SG=$dkim_domain, KT=$dkim_key_testing, SUB=$dkim_key_nosubdomains, S=$dkim_selector, R=$dkim_verify_reason # We accept failed signatures too, when DKIM is set to the test mode in sender's DNS accept condition = $dkim_key_testing add_header = X-DKIM: TEST mode result for $sender_address_domain (signer=$dkim_cur_signer): $dkim_verify_status; $dkim_verify_reason # logwrite = DKIM DEBUG 01: TEST ERR=$acl_m_dklog # Accept valid/passed signatures accept dkim_status = pass add_header = X-DKIM: $dkim_verify_status (address=$sender_address domain=$dkim_cur_signer), signature is good. # logwrite = DKIM DEBUG 02: OK=$acl_m_dklog # Deny failures (logging only, while testing; enable later by uncommenting 'deny' and removing the verb 'warn') # excluding Gmail/Google while investigating - some email fail deny message = DKIM test failed: $dkim_verify_reason. Please use only authorized email address & SMTP server! dkim_status = fail !sender_domains = gmail.com:google.com add_header = X-DKIM: $dkim_cur_signer ($dkim_verify_status); $dkim_verify_reason # logwrite = DKIM DEBUG 10: RJCT ERR=$acl_m_dklog warn dkim_status = fail sender_domains = gmail.com:google.com # logwrite = DKIM DEBUG 20: WARN ERR=$acl_m_dklog # Deny invalid signatures deny message = DKIM signature could not be verified: $dkim_verify_reason. Please review the DNS records of $sender_address_domain dkim_status = invalid add_header = X-DKIM: $dkim_cur_signer ($dkim_verify_status); $dkim_verify_reason # logwrite = DKIM DEBUG 11: RJCT ERR=$acl_m_dklog # Deny missing signatures at important known signers, frequently used domains, # and at local domains (except of someexception.com etc.!) # (by doing so here, we save some excess processing time and bandwidth # needed for frequent DNS TXT lookups in the next section) deny message = DKIM signature missing! The policy of $sender_address_domain enforces the use of DKIM signatures. dkim_status = none sender_domains = +dkim_domains : +local_domains !sender_domains = someexception.com : another.exception.org : more.exceptions.com add_header = X-DKIM: $sender_address: signature is missing. # logwrite = DKIM DEBUG 12: RJCT ERR=$acl_m_dklog # Queying the DNS for signing policies with an external Perl script # Perl script calls replaced with dnsdb() below # deny message = DKIM signature missing! The policy of $sender_address_domain enforces the use of DKIM signatures. # dkim_status = none # !sender_domains = +dkim_domains : +local_domains : someexception.com : another.exception.cz # condition = ${run{/root/scripts/dkim_policy.pl $sender_address_domain}{yes}{no}} # logwrite = DKIM DEBUG 13: RJCT P=$value, D=$sender_address_domain # TX 2017-01-11 ----- added polling the DNS for signing policies # done in three separate deny blocks to save unnecessary processing # querying the DKIM signing policy in _domainkey first (should be used the most) # Note: we could/should also exclude domains set into the testing mode ("t=y" in the policy string) # though a big part of domains use "t=y" at perfectly working key, and there must be a signature # anyway, once policy declared. The email lands here only if no DKIM signature was found, hence # excluding testing mode from denying is commented out for now deny message = DKIM signature missing! The DKIM policy of $sender_address_domain enforces the use of DKIM signatures. dkim_status = none set acl_m_dkpl1 = ${lookup dnsdb{txt=_domainkey.$sender_address_domain}} condition = ${if match {$acl_m_dkpl1}{\N(?i).*(o=-|o=!).*\N}} # !condition = ${if match {$acl_m_dkpl1}{\N(?i).*(t=y).*\N}} # logwrite = DKIM DEBUG 51: D=$sender_address_domain, DKIM policy: $acl_m_dkpl1 # querying the ADSP signing policy in _adsp._domainkey as 2nd (still frequently used) # (AFAIK, no test mode defined in ADSP specifications) deny message = DKIM signature missing! The ADSP policy of $sender_address_domain enforces the use of DKIM signatures. dkim_status = none set acl_m_dkpl2 = ${lookup dnsdb{txt=_adsp._domainkey.$sender_address_domain}} condition = ${if match {$acl_m_dkpl2}{\N(?i).*(dkim=all|dkim=discardable).*\N}} # logwrite = DKIM DEBUG 52: D=$sender_address_domain, ADSP policy: $acl_m_dkpl2 # querying the DomainKeys (RFC4870) policy in _policy._domainkey as last (historical draft) deny message = DKIM signature missing! The DomainKeys policy of $sender_address_domain enforces the use of DKIM signatures. dkim_status = none set acl_m_dkpl3 = ${lookup dnsdb{txt=_policy._domainkey.$sender_address_domain}} condition = ${if match {$acl_m_dkpl3}{\N(?i).*(o=-|o=!).*\N}} # !condition = ${if match {$acl_m_dkpl3}{\N(?i).*(t=y).*\N}} logwrite = DKIM DEBUG 53: D=$sender_address_domain, DK policy: $acl_m_dkpl3 warn logwrite = DKIM DEBUG 59: D=$sender_address_domain, policies DKIM:$acl_m_dkpl1, ADSP:$acl_m_dkpl2, DK:$acl_m_dkpl3 # ----- / end signing policies check # And accept anything else (i.e. senders without DKIM policy, or with a neutral one) accept # logwrite = DKIM DEBUG 14: ACPT P=$value, D=$sender_address_domain # ----------- / end of ACL DKIM ------------------------------------------- -- ## List details at https://lists.exim.org/mailman/listinfo/exim-users ## Exim details at http://www.exim.org/ ## Please use the Wiki with this list - http://wiki.exim.org/
