YH wrote:
>
> > 18 gb ibm dghs18v u2w scsi
> >
> > The 18 gb hard drive is the only hard drive on this
> > system. I've set the scsi id of the drive to 0, and
> > all of the scsi bios parameters look ok. This is the
> > only scsi device in the system, so I've set the
> > active termination jumper. The drive and its correct
>
> U2W drives DO NOT have active termination as far as I have seen
> or heard.
>
> Make sure that the U2W *cable* you are using has built-in termination.
> The terminator should look like a half-sized match box, usually
> colored black.
>
> --
> Yusry Harfuddin [[EMAIL PROTECTED]]
>
> Linux rulez, Windoze sucks.
Hi, Yusry and Gary,
Thanks for the tip. It was the cable. The system came with a regular
uw cable instead of a termnitaed u2w cable. I got the proper cable and
completed the installation. Thanks again!
Hidong
