Hi,
I've a problem with the kernel 2.2.5-15 (installed from kpackage, I believe is
kernel-2.2.5-15.i386.rpm). This kernel (2.2.5-mk5 works reguraly) hang my cdrw yamaha
4416E bios 1.0b on SuperMicro P6SBA.
Temporaly it's seem resolved by removing /dev/cd* but I mail you file that can be
usefull to fix it (file0.txt before changing - file1.txt after changing)
The strange error is more more frequently on burned CD respect the silver.
_________________________________________________________
DO YOU YAHOO!?
Il tuo indirizzo gratis e per sempre @yahoo.it su http://mail.yahoo.it
--- Loaded modules ---
[root@localhost /root]# lsmod
Module Size Used by
nls_iso8859-1 2020 1 (autoclean)
nls_cp437 3548 1 (autoclean)
vfat 11420 1 (autoclean)
fat 25344 1 (autoclean) [vfat]
es1370 22140 0
soundcore 2404 4 [es1370]
--- List of /dev/cd* ---
[root@localhost /root]# cd /dev
[root@localhost /dev]# ls cd*
brw-rw---- 2 root 22, 64 mag 5 1998 cdrom
lrwxrwxrwx 1 root 8 mag 16 20:37 cdrw -> /dev/hdc
brw-rw-r-- 1 root 15, 0 mag 5 1998 cdu31a
brw-r----- 1 root 24, 0 mag 5 1998 cdu535
read the file dmesg0.txt to see the boot
--- Error on mount /dev/hdc ---
[root@localhost /dev]# mnt /mnt/cdrw
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x00
ATAPI device hdc:
Error: Unit attention -- (Sense key=0x06)
Not ready to ready transition, medium may have changed -- (asc=0x28,
ascq=0x00)
The failed "Test Unit Ready" packet command was:
"00 00 00 00 00 00 00 00 00 00 00 00 "
--- Error on reading /dev/hdc ---
[root@localhost /dev]# cd /mnt/cdrw
[root@localhost /dev]# ls -r * | less
hdc: irq timeout: status=0xd0 { Busy }
hdc: ATAPI reset timed-out, status=0x80
ide1: reset timed-out, status=0x80
hdc: status timeout: status=0x80 { Busy }
hdc: drive not ready for command
Linux version 2.2.5-15 ([EMAIL PROTECTED]) (gcc version egcs-2.91.66
19990314/Linux (egcs-1.1.2 release)) #1 Mon Apr 19 23:00:46 EDT 1999
Detected 334098118 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 333.41 BogoMIPS
Memory: 63140k/65536k available (996k kernel code, 412k reserved, 928k data, 60k init)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Pentium II (Deschutes) stepping 02
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.26 (19981001) Richard Gooch ([EMAIL PROTECTED])
PCI: PCI BIOS revision 2.10 entry at 0xfdb81
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Enabling I/O for device 00:3a
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9)
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: SAMSUNG SV0432A, ATA DISK drive
hdb: WDC AC36400L, ATA DISK drive
hdc: YAMAHA CRW4416E, ATAPI CDROM drive
hdd: LTN301, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: SAMSUNG SV0432A, 4112MB w/482kB Cache, CHS=784/255/63
hdb: WDC AC36400L, 6149MB w/256kB Cache, CHS=784/255/63
hdc: ATAPI 16X CD-ROM DVD-RAM CD-R/RW drive, 2048kB Cache
Uniform CDROM driver Revision: 2.54
hdd: ATAPI 32X CD-ROM drive, 120kB Cache
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: using high-speed MMX checksum routine
pII_mmx : 813.054 MB/sec
p5_mmx : 787.908 MB/sec
8regs : 575.691 MB/sec
32regs : 413.766 MB/sec
using fastest function: pII_mmx (813.054 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
hda: hda1 hda2 hda3 < hda5 >
hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 >
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 60k freed
Adding Swap: 144548k swap-space (priority -1)
es1370: version v0.19 time 21:48:00 Apr 19 1999
es1370: found adapter at io 0xef00 irq 10
es1370: features: joystick off, line in, mic impedance 0
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x00
ATAPI device hdc:
Error: Unit attention -- (Sense key=0x06)
Not ready to ready transition, medium may have changed -- (asc=0x28, ascq=0x00)
The failed "Test Unit Ready" packet command was:
"00 00 00 00 00 00 00 00 00 00 00 00 "
VFS: Disk change detected on device ide1(22,0)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
--- Loaded modules ---
[root@localhost /root]# lsmod
Module Size Used by
nls_iso8859-1 2020 1 (autoclean)
nls_cp437 3548 1 (autoclean)
vfat 11420 1 (autoclean)
fat 25344 1 (autoclean) [vfat]
es1370 22140 0
soundcore 2404 4 [es1370]
--- I've removed all cd* devices ---
[root@localhost /root]# ls /dev/cd*
ls: /dev/cd*: No such file or directory
--- Error on mount /dev/hdc ---
[root@localhost /root]# mnt /mnt/cdrw
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x00
ATAPI device hdc:
Error: Unit attention -- (Sense key=0x06)
Not ready to ready transition, medium may have changed -- (asc=0x28,
ascq=0x00)
The failed "Test Unit Ready" packet command was:
"00 00 00 00 00 00 00 00 00 00 00 00 "
