On Sun, 8 Aug 1999, Civileme wrote:
>
>
> 1. Buy a good PCI/Video card, not expensive. A generic S3 Virge/DX with 4Mb
> RAM should be adequate, even if you plan to play Quake.
Don't skimp here get something with a good linux 3d driver
> 2. Sound, if you equip your computer with it, is most easily installed, in my
> experience, for Creative/Soundslaster Products. The NEWEST should be avoided
> unless you like to spend a few hours on the web finding beta drivers and
> instructions. (No SBLive, get a good AWE 64 for the ISA Bus and it should work
> out all right.) Save sndconfig for one of your later steps. And if you get
> some weird error messages running it from a console or desktop, try booting
> into single-user mode and running sndconfig.
I've never had problems with any soundblaster cards
> 2.1 With hardware in place, Run Install. I recommend you select "Custom" or
> else run Upgrade off the CD right after install and make sure the network
> management workstation stuff gets loaded.
Why do they want snmpd?
> 3. Get X running and kfm(by clicking on the "Home" icon on the panel at the
> bottom of the screen). Point kfm to http://www.linux-mandrake.com and look on
> the left side of the screen for the "Updates". Go there, then find a mirror,
> still using kfm. Once you are where the updates are listed, open another
> window of kfm with your home directory. Select all the update files you want
> and drag them to your home directory. Yes, you'll get "Copying files" instead
> of "Downloading" messages, but I believe you'll think this is prety cool.
> Those files are .rpm.gz so you will have to click on console which will bring a
> command line window up at your home directory. (Don't do that until the copy
> is finished.) DISCONNECT from the Internet (by closing the kfm window or by
> stopping Kppp).
>
> Then enter
>
> [noise @ /home/noise]$ su
> password: *give the root password here*
> [root@ /home/noise]# gunzip *.gz
Did somebody hack kde and forget to tell me? The files on the mirrors
should be .rpm not .gz
> Logout
> login as root
> return to your user's home directory and open the home folder there
>
> Single-click the first .rpm file. KPackage will open a window and you can
> click "Install" after ticking "replace files". On printtool, also unclick
> "Check Dependencies"
seeing as your at the console already just type 'rpm -F *.rpm' , if you do
use kpackage it should have an Upgrade checkbox use this not Install, and
it generaly isn't required to use --nodeps or uncheck "Check Dependancies"
> After all of this, you should have a fairly stable system and stable Netscape
> to work with.
>
> 4. The setup for remote SAMBA printers does not work. I haven't had time to
> verify if it is the "filter" script in /var/spool/lpd/lp (or whatever printer
> name you use in place of lp) or the script filter that is copied to
> /usr/bin/smbprint. I have a fix, an *ugly* one, where I add these lines to
> .config in the /var/spool/lpd/printername directory
>
> server=remoteservername
> service=remoteprinternameonserver
>
> In my case that was
>
> server=TESTRIG
> service=HPBIG
>
> for \\TESTRIG\HPBIG as accessed by the windows machines in the LAN
>
> ALSO, the /var/spool/lpd/lp/filter file will need editing. In the "if" toward
> the end of the file where it checks for "SMB", change the text
The type-o introduced by Redhat, was fixed along time ago if you find
another please let us know.
> ${FPIDIR}
>
> to
>
> /usr/bin
>
> so the new filter added to the filter path will be /usr/bin/smbprint
>
> 5. I haven't found any package that will masquerade other LAN machines onto
> the internet. Supposedly it can be done through ipchains scripts, but
> I haven't made any work yet. I did use PaNTs which is supposed to work for
> RedHat 6 but I can't get anything through it on port 80 (web access).
echo 1> /proc/sys/net/ipv4/conf/eth0/forwarding
ipchains -I forward -j MASQ -s 192.168.0.0/16 -i eth0 -d 0/0
ipchains -I input -j DENY -s 192.168.0.0/16 -i ! eth0 -d 0/0 -l
> SO far, those are the annoyances, gotchas, etc. Naturally, the little caveats
> such as "don't go surfing/chatting as root" I have omitted.
>
> Civileme
in order of discovery:
you'll need the updated sox package to use sndconfig
you'll need the updated kernel and initscripts, so if it does crash you
don't have to reinstall which is pretty much the case after a few fsck's
netscape as usual not quite in the best of shape downgrade/upgrade to the
version in updates
Thats about all the true killers i can think of off hand
> John Aldrich wrote:
>
> > Hey, all.... just picked up my copy of Mandrake 6.0 from the computer store
> > (figured I might as well, since no one is going to burn me a copy of the ISO
> > image <G>)
> > My machine will be a Dual-PPro 200 with 192 Megs of ram and about 10.7 Gigs
> > of drivespace. I haven't picked up a video card yet, but that's the next
> > purchase, along with a "generic" PCI ethernet card.
> > Question is, what should I look out for with regards to installation
> > headaches on this system? I understand Mandrake has a 6.1 version out now
> > (not available in the local stores, apparently.)
> > This is really going to be a "training" machine for me to teach myself Linux
> > Admin skills. Anything I should watch out for with this?
> > Thanks...
> > John
>
> --
> Civileme Say:
>
> "He who buy on leading edge know what it feel like to slide down razor blade of
>life."
>
>
>
