peacemkr wrote:
> What does this all mean? And how do I fix it?
> ---------------------------
> Yes I did a proper shutdown!
I got the same problem on VIA MVP3 Mainboard!
Try to search for a update BIOS!
As I know, Epox (2TheMax) it is fixed!
> System:
>
> AMD 350 / 256meg pc-100 ram / WD 13 gig hd
Mine 2TheMax MVP3G2 + AMD K6-3 400 + 128M + 9.1G (U66) + 8.4G (U33) + ZIP +
LS120 + SCSI CDROM + SCSI CD-R
> only half of drive partitioned .. using disk drude .. only os on hd ..
> know the os is below the 1024 range as whole hd only has 1582 sec.
> hda1 3gig / -- Mandrake 6.1
> hda5 3 gig unmounted and empty -- future bsd maybe
> hda6 2 gig /hold -- used for my downloads
> hda7 127 meg swap
> rest unpartitioned
> -------------------------
> NOTE: I had same error when I installed RH 6.0 on drive from CD ..
> this install was via ftp ....
> -------------------------
> System works ok other than the error message, and on reboot continues to
> work fine. It's a new install and I just don't want to get 2 weeks into
> costomizing it only to find I should have fixed something and have to
> start over.
Reboot will be fine right?
> When I shut down my Mandrake 6.1 I get the following message:
> (edited as I only type with 2 fingers and this already took 20 min to
> type what I did)
> ....................................
> general protection fault: f000
> CPU: 0
> EIP: 0050:[<0000873b>]
> EFLAGS: 00010047
> eax: 00005301
> snip....
> bla bla bla....
>
> Code: <Unable to handle kernal paging request at virtual address
> 0000873b
> current->tss.cr3 = 0e700000, %cr3 = 0e700000
> *pde = 00000000
> Oops: 0000
> CPU: 0
> EIP: 0010:[<8010acde>]
> EFAGS: 00010083
> eax: 0000873b ebx: 00000000 ecx: 00000005 edx: 8edcddb8
> esi: 0000002b edi: 8edc000 ebp: 90899999 esp: 8edcdd40
> ds: 0018 es: 0018 ss: 0018
> Process hault (pid: 626, process nr: 14, stackpage=8edcd000)
> Stack: 0000f000 8edcddb8 00005307 67890000 0000f000 8edcddb8 00005307
> 91000000
> 00000086 00000001 80231da2 80231da2 8010b7ed 8edcddb8 00005307
> 8010b7e4
> 801d9898 801d996d 0000f000 00000003 8edcc000 7fff831a 00000019
> 800bd140
> Call Trace: [<91000000>] [<8010b7ed>] [<8010b7e4>]
> snip........
> bla bla bla ....
>
> Code: 8a 04 03 25 ff 00 00 00 43 50 68 90 98 1d 80 e8 4e aa 00 00
> /etc/rc/rc0.d/S00halt: line 1: 626 Segmentation fault halt -i -d
> -p
>
> Thanks in advance,
> Peacemkr1
--
Rgds Kit
K&B Computer Technology Co.
ICQ: 28280598
http://www.knb.com.hk
