HI,
I've posted this in the newbie list, but thought I'd try my luck here
as well.
I have the above and when I insert the card, it is detected as hdlx,
with the x as partitions on the HDD. I looked in my /dev dir and it
only goes to hdhx.
Below is the excerpt from /var/log/messages:
Oct 23 00:54:19 pc15-gmy cardmgr[339]: initializing socket 1
Oct 23 00:54:19 pc15-gmy cardmgr[339]: socket 1: ATA/IDE Fixed Disk
Oct 23 00:54:19 pc15-gmy cardmgr[339]: executing: 'insmod
/lib/modules/2.2.13-7mdk/pcmcia/ide_cs.o'
Oct 23 00:54:24 pc15-gmy kernel: hdl: ST92130AG, ATA DISK drive
Oct 23 00:54:24 pc15-gmy kernel: ide5 at 0x160-0x167,0x366 on irq 3
Oct 23 00:54:24 pc15-gmy kernel: hdl: ST92130AG, 2062MB w/0kB Cache,
CHS=4191/16/63
Oct 23 00:54:24 pc15-gmy kernel: hdl: [PTBL] [523/128/63] hdl1 < hdl5
hdl6
hdl7 hdl8 >
Oct 23 00:54:24 pc15-gmy kernel: ide_cs: hdk: Vcc = 5.0, Vpp = 0.0
Oct 23 00:54:24 pc15-gmy cardmgr[339]: executing: './ide start hdk'
Oct 23 00:54:24 pc15-gmy cardmgr[339]: + ./MAKEDEV: don't know how to
make
device "hdk"
I would greatly appreciate if someone could point me in the right
direction.
TIA
--
Ronald Yeo
[EMAIL PROTECTED]
