Ramon....I experimented extensively and always failed in making a boot
disc on a ls-120. If you have a 1.44 boot floppy already made then the
ls-120 will boot the system from it, albeit verrryy slowly :-)
Alan
Ramon Gandia wrote:
>
> On Thu, 02 Dec 1999, Dan Swartzendruber wrote:
> > How do I do it? The vanilla incantation fails, as it tries to do a format
> > operation, which doesn't work. If I try giving it /dev/hdb instead, that
> > hangs until I interrupt it.
>
> I believe you set the LS120 to be the boot device in your
> BIOS. Then you have to make the LS-120 whatever device
> it is in the IDE chain. If it is connected as slave on
> the primary interface, it will be hdb. Then you write
> LILO to it, since you want it to boot. There may be
> other issues, but the main one is to set it to be the
> boot device in the BIOS. If your BIOS has no support
> for LS-120 as a boot disk, then you have to get a
> circuit card that will tell the bios that you have
> an LS-120 boot device. Those generally do not come
> with the LS-120. Else, you are out of luck and you
> treat the LS-120 as merely a removable hard drive device.
>
> --
> Ramon Gandia ============= Sysadmin ============== Nook Net
> http://www.nook.net [EMAIL PROTECTED]
> 285 West First Avenue tel. 907-443-7575
> P.O. Box 970 fax. 907-443-2487
> Nome, Alaska 99762-0970 ==== Alaska Toll Free. 888-443-7525
