My Mandrake 7 Install worked OK inc ISDN and then I had to re-install. I cannot duplicate my last setup Here is the dmesg log of the problem, I have ran 'kcmkisdn' and KISDN as my connect tool /*************************************************************************** ******************************************************************** Linux version 2.2.14-15mdk ([EMAIL PROTECTED]) (gcc version 2.95.2 19991024 (release)) #1 Tue Jan 4 22:24:20 CET 2000 Detected 451033204 Hz processor. ide_setup: hdd=ide-scsi Console: colour VGA+ 80x25 Calibrating delay loop... 901.12 BogoMIPS Memory: 127848k/131008k available (1092k kernel code, 416k reserved, 1588k data, 64k init, 0k bigmem) Dentry hash table entries: 262144 (order 9, 2048k) Buffer cache hash table entries: 131072 (order 7, 512k) Page cache hash table entries: 32768 (order 5, 128k) VFS: Diskquotas version dquot_6.4.0 initialized CPU: AMD AMD-K6(tm) 3D processor stepping 0c Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED]) PCI: PCI BIOS revision 2.10 entry at 0xfb4f0 PCI: Using configuration type 1 PCI: Probing PCI hardware Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP TCP: Hash tables configured (ehash 131072 bhash 65536) Initializing RT netlink socket Starting kswapd v 1.5 Detected PS/2 Mouse Port. Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A pty: 256 Unix98 ptys configured apm: BIOS version 1.2 Flags 0x07 (Driver version 1.9) Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 4096K size PCI_IDE: unknown IDE controller on PCI bus 00 device 78, VID=10b9, DID=5229 PCI_IDE: not 100% native mode: will probe irqs later PCI_IDE: simplex device: DMA disabled ide0: PCI_IDE Bus-Master DMA disabled (BIOS) PCI_IDE: simplex device: DMA disabled ide1: PCI_IDE Bus-Master DMA disabled (BIOS) hda: Maxtor 91728D8, ATA DISK drive hdb: Pioneer CD-ROM ATAPI Model DR-744 0102, ATAPI CDROM drive hdc: Maxtor 88400D8, ATA DISK drive hdd: PHILIPS CDD3610 CD-R/RW, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: Maxtor 91728D8, 16479MB w/512kB Cache, CHS=2100/255/63 hdc: Maxtor 88400D8, 8011MB w/256kB Cache, CHS=16278/16/63 hdb: ATAPI 32X CD-ROM drive, 128kB Cache Uniform CDROM driver Revision: 2.56 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 raid5: measuring checksumming speed raid5: MMX detected, trying high-speed MMX checksum routines pII_mmx : 944.499 MB/sec p5_mmx : 912.876 MB/sec 8regs : 623.697 MB/sec 32regs : 431.673 MB/sec using fastest function: pII_mmx (944.499 MB/sec) scsi : 0 hosts. scsi : detected total. md.c: sizeof(mdp_super_t) = 4096 Partition check: hda: hda1 hda2 hda3 < hda5 > hdc: [PTBL] [1021/255/63] hdc1 hdc2 hdc3 < hdc5 hdc6 > autodetecting RAID arrays autorun ... ... autorun DONE. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 64k freed Adding Swap: 136512k swap-space (priority -1) Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996 SB 4.16 detected OK (220) scsi0 : SCSI host adapter emulation for IDE ATAPI devices scsi : 1 host. Vendor: PHILIPS Model: CDD3610 CD-R/RW Rev: 3.01 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 6x/6x writer cd/rw xa/form2 cdda tray CSLIP: code copyright 1989 Regents of the University of California ISDN subsystem Rev: 1.93/1.80/1.95/1.60/1.17/1.3 loaded HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.3c (module) HiSax: Layer1 Revision 2.36 HiSax: Layer2 Revision 2.20 HiSax: TeiMgr Revision 2.13 HiSax: Layer3 Revision 2.10 HiSax: LinkLayer Revision 2.40 HiSax: Approval certification valid HiSax: Approved with ELSA Quickstep series cards HiSax: Approval registration numbers: HiSax: German D133361J CETECOM ICT Services GmbH HiSax: EU (D133362J) CETECOM ICT Services GmbH HiSax: Approved with Eicon Technology Diva 2.01 PCI cards HiSax: Total 1 card defined HiSax: Card 1 Protocol EDSS1 Id=Teles1 (0) HiSax: Teles IO driver Rev. 2.14 Teles: 16.3 Byte at d80 is ff HiSax: Card Teles 16.3 not installed ! ISDN-subsystem unloaded ISDN subsystem Rev: 1.93/1.80/1.95/1.60/1.17/1.3 loaded HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.3c (module) HiSax: Layer1 Revision 2.36 HiSax: Layer2 Revision 2.20 HiSax: TeiMgr Revision 2.13 HiSax: Layer3 Revision 2.10 HiSax: LinkLayer Revision 2.40 HiSax: Approval certification valid HiSax: Approved with ELSA Quickstep series cards HiSax: Approval registration numbers: HiSax: German D133361J CETECOM ICT Services GmbH HiSax: EU (D133362J) CETECOM ICT Services GmbH HiSax: Approved with Eicon Technology Diva 2.01 PCI cards HiSax: Total 1 card defined HiSax: Card 1 Protocol EDSS1 Id=avm_a1_pci (0) HiSax: AVM PCI driver Rev. 1.14 AVM PCI: stat 0x2020a AVM PCI: Class A Rev 2 HiSax: AVM Fritz!PCI config irq:9 base:0xE400 AVM PCI: ISAC version (0): 2086/2186 V1.1 AVM Fritz PnP/PCI: IRQ 9 count 0 AVM Fritz PnP/PCI: IRQ 9 count 5 HiSax: DSS1 Rev. 2.21 HiSax: 2 channels added HiSax: MAX_WAITING_CALLS added HiSax: debugging flags card 1 set to 4 isdn_ppp_bind: Can't find a (free) connection to the ipppd daemon. HiSax: debugging flags card 1 set to 0 HiSax module removed ISDN-subsystem unloaded **************************************************************************** ***************************************************************/ Thanks DS (Nottm UK) --------------------------------------------------------- http://www.santon.clara.co.uk/ ---------------------------------------------------------
