Larry Sword wrote:
>
> RRPotratz wrote:
>
> > Hello,
> > I've upgraded my motherboard and CPU and now can not get my SB64AWE to
> > work correctly. As the modules are loaded as it boots the card starts to buzz
> > and does not stop. The only way to get it to stop is to edit anything having
> > to do with sound out of /etc/conf.modules and reboot.
> > After rebooting, I run sndconfig and the buzzing appears again as soon
> > as the card is initalized.
> > The card seems to be using the correct parameters according to the info
> > panel in KDE (i.e. irq 5, dma low 1, dma high 5, mem at 220 and midi at 330.)
> > Any Ideas?
> > Thanks, Randy
>
> Try checking at the rear connections. Since you installed into new mb you may
> have the speaker out connected incorrectly???
> Just an ideal :-)
>
> Larry
Or the card perhaps is not seated in the slot.
I had this happen to me with my SB128 on my current machine when I built it.
It drove me nuts for a couple of days.. :)
The card was in and working.. I added something and somehow dislodged the card out of
the
pci slot
away from the back. Just enough to cause problems, not enough to obviously notice it.
Alan
-
======================================
[EMAIL PROTECTED] ([EMAIL PROTECTED])
running Linux Mandrake 6.1 and/or BeOS.
