Hi
Can you make color prints or only black & white? I ask this because I have a
Deskjet 970Cxi and only prints on B&W.
Thanks
Alvaro
----- Original Message -----
From: "Tom Berkley" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, March 16, 2000 8:55 PM
Subject: Re: [expert] Solved: Printer problem in mdk 7.0
> I have an HP Deskjet 895 with USB and parallel cables attached
> simultaneously. Works fine but when I print from Win98 thru the USB
> cable and then reboot to linux and try to use the parallel cable
> connection, the printer must be powered off before I attempt any printer
> access or I have to reboot again after cycling the printer power to make
> the printer work with linux.
>
> Tom
>
> Norman Carver wrote:
> >
> > Printer is now working via parallel port. Problem
> > appeared to be due to having both the usb and parallel
> > cables attached to the printer. Win98 has no problem
> > with this with the Epson, but Linux appears to--no
> > output as I mentioned in earlier post. While we had tried
> > disconnecting this cable and rebooting before (without
> > success), we may not have shut printer down in between
> > as we did this time. So usb cable has been removed.
> > Still a bit hard to understand how this can be the issue.
> > If the Epson works fine with both attached in Win98, why
> > won't it work under Linux?
> >
> > Anyway, my friends setup is a bit closer. Now if we can
> > just get X configured nicely for his Rage Pro Turbo.
> > He is getting ghosting, which I gather implies improper
> > settings. Perhaps will post on this later if we cannot
> > make progress.
> >
> > Thanks,
> > Norm Carver
>
