Use a linux boot floppy and type "cat /proc/pci" on a command line.
Tell me what resources are being displayed for your UDMA66 controller.
Matt
>From: Larry Sword <[EMAIL PROTECTED]>
>Reply-To: [EMAIL PROTECTED]
>To: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>
>Subject: [expert] UMDA66, HPT366
>Date: Mon, 27 Mar 2000 10:31:37 -0800
>
>1. Can't get to IDE2 or IDE3
>
>System:
>OS: Mandrake-Linux 7.02 AIR smp
>Abit BP6 with BIOS QQ
>Matrox G400 AGP
>SoundBlaster Lice in PCI-2
>PCI -3 is open , I left this open because it shares IRQ with the HPT366
>controller. So there could not be any conflicts.
>PCI-4 NIC
>PCI -5 NIC
>----------------------------
>
>I decided to install a new UDMA66 drive on the HPT366 controller at
>ide2.
>Okay what am I missing or doing wrong here.
>
>From my lilo:
>
>boot=/dev/hda
>map=/boot/map
>install=/boot/boot.b
>vga=ext
>default=linux
>append="ide2=0xd400,0xd802 ide3=0xe999,0xe402 hdc=ide-scsi hdd=ide-scsi"
>
>From my message file:
>
>Mar 27 08:46:12 sword kernel: ide_setup: ide2=0xd400,0xd802
>Mar 27 08:46:12 sword kernel:
>Mar 27 08:46:12 sword kernel: ide_setup: ide3=0xe999,0xe402
>Mar 27 08:46:12 sword kernel:
>Mar 27 08:46:12 sword kernel: ide_setup: hdc=ide-scs
>
>--snip--
>
>Mar 27 08:46:13 sword kernel: hdc: TOSHIBA CD-ROM XM-6502B, ATAPI CDROM
>drive
>Mar 27 08:46:13 sword kernel: hdd: CD-R/RW RW7060A, ATAPI CDROM drive
>Mar 27 08:46:13 sword kernel: hde: Maxtor 54098U8, ATA DISK drive
>Mar 27 08:46:13 sword kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Mar 27 08:46:13 sword kernel: ide1 at 0x170-0x177,0x376 on irq 15
>Mar 27 08:46:13 sword kernel: ide2: Disabled unable to get IRQ -11.
>--------------------------------------^^^^^^^^^^^^^
>
>So the big question is, why cant't the kernel get the IRQ -11 and use
>the
>drive.
>
>*** The HPT366 controllers are liste as IRQ 18 in my /proc/interrupts
>after
>booting into Linux.
>
>TIA
>
>Larry
>
>
>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
