I have installed 7.1 several times on several machines without much
hassle. But my main system which worked perfectly with 7.0 won't allow me
to install with 7.1
I have the following: Adaptec 2940 UW
SCSI ID 3 is a Plextor PX-32TS 32X CD-ROM
SCSI ID 5 is a Yamaha CDRW 4260 - (end termination)
When I boot the Mandrake 7.1 CD - after the bus scan, it asks which SCSI
CDROM to use, scsi0 or scsi1
I have tried both, but the follow occurs when I try scsi0 (the plextor drive)
<4> Detected scsi CD-ROM sr0 at scsi 0, channel 0, id 3, lun 0
<4> Detected scsi CD-ROM sr1 at scsi 0, channel 0, id 5, lun 0
<4> sr1: scsi3-mmc drive: 6x/6x writer cd/rw xa/form2 cdda tray
<7> VFS: Disk change detected on device sr(11,0)
scsi0:0:3:-1 Unexpected busfree, LASTPHASE = 0xa0, SEQADDR = 0x15d
Then a timeout occurs and it says unable to read scsi0 - check that CD is
in the tray
The system work fine with other OSs including Mandrake 7.0 NO PROBLEM!!
Any help would be appreciated!!
**************************************************************
(�`�.��.-> F O X Consulting Services <-.��.���)
Europe Voice: +49/(0)172-9600938 Fax: +49/(0)89-92185555
E-Mail: [EMAIL PROTECTED] or [EMAIL PROTECTED]
FCS Web Page: http://foxconsult.com
USA Voice: +1 (650) 369-7369 Fax: +1 (650) 429-2122
**************************************************************
