The 3c509x drivers will support the 3c905B NICs. Try these. That's what I've
done.
--Greg
> David,
>
> Thanks for the response... One step closer two steps bacl..
>
> Linux Mandrake has not identified the cards correctly they really are
> 3C905B-TX.
>
> So now what?
>
> David Mihm wrote:
>
> > On Sat, 26 Aug 2000, Jeff Hoffman wrote:
> >
> > > I am having trouble connecting with DHCPCD with Mandrake 7.1. Dmesg
> > > gives me a warning about both ethernet cards at IRQ 0. My PNP OS is
set
> > > to NO. lspci see the cards. and eth1 says it comes up fine. However
> > > ifconfig only shows the lo device. Any ideas?
> >
> > First, these are PCI cards, therefore isapnp (ISA) has nothing to do
with
> > anything. Secondly, this is a known issue with these cards and it is
> > covered in the Ethernet HOWTO
> > (http://www.linuxdoc.org/HOWTO/Ethernet-HOWTO.html), specifically on
this
> > page/section - http://www.linuxdoc.org/HOWTO/Ethernet-HOWTO-3.html#ss3.6
> > .
> >
>
______________________________________________________________________________
Vous avez un site perso ?
2 millions de francs � gagner sur i(france) !
Webmasters : ZE CONCOURS ! http://www.ifrance.com/_reloc/concours.emailif
