> Hi....I Just Intalling The Linux Mandrake in my friends computer...and she
had
> an internal Modem and the chipset is Motorolla.....And Linux cannot detect
that
> modem.......so i asked my brother who is more expert in BSD than I...and
he
> said Linux and BSD havent support for internal Modem...is that true
> ???.. I'll try to find it in Mandrake URL but still make me confuse...can
> someone explain that problem to me ?
>
Arie
. Log in as root and from terminal enter the following command
# cat /proc/pci
This will list all your PCI devices. On this list you should see either
Communication controller or Communication device,
That listing is your modem. If it shows as Comm. device you have a winmodem
and it won't work in Linux.
If it shows as Comm. controller proceed as follows:
Write down the first I/O range. In the example I am using 0xd800 replace
that with yours.
Enter the following
# setserial /dev/ttyS3 port 0xd800 spd_vhi skip_test auto_irq autoconfig
If there are no errors, then enter
# setserial /dev/ttyS3 uart 16550A
Select /dev/ttyS3 as the device in kppp and your modem should now initalize
and operate.
To make this perm. you will need to edit your rc.local file which is located
in the /etc/rc.d directory. Add the 2 setserial lines to the end of this
file Save the changes and reboot your system.
Should you have any problems let me know and I will try to help.
Charles
