The following is reported by GCombust, a GUI interface to cdrecord. (note the
first line). Changing GUI interfaces changes nothing - cdrecord is doing the
work. As stated previously this set-up worked perfectly in 7.1 and I have
backed down to the version of cdrecord (1.8) shipped with 7.1 under 7.2 with
the same errors being produced.
--------------
Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
TOC Type: 0 = CD-DA
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 2.1.39
Using libscg version 'schily-0.1'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'LG '
Identifikation : 'CD-RW CED-8080B '
Revision : '1.05'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
FIFO size : 4194304 = 4096 KB
Track 01: audio 49 MB (04:56.98) no preemp
Track 02: audio 49 MB (04:51.98) no preemp
Track 03: audio 42 MB (04:12.00) no preemp
Track 04: audio 43 MB (04:19.98) no preemp
Track 05: audio 47 MB (04:41.97) no preemp
Track 06: audio 41 MB (04:08.98) no preemp
Track 07: audio 47 MB (04:40.00) no preemp
Track 08: audio 48 MB (04:50.98) no preemp
Track 09: audio 34 MB (03:28.00) no preemp
Track 10: audio 43 MB (04:18.97) no preemp
Track 11: audio 56 MB (05:32.97) no preemp
Track 12: audio 39 MB (03:52.00) no preemp
Track 13: audio 40 MB (03:58.00) no preemp
Track 14: audio 33 MB (03:19.21) no preemp
Track 15: audio 47 MB (04:41.97) no preemp
Lout start: 665 MB (65:56/03) = 296553 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in: -11625 (97:27/00)
ATIP start of lead out: 335100 (74:30/00)
speed low: 0 speed high: 4
power mult factor: 5 6
recommended erase/write power: 3
Disk type: Phase change
Manuf. index: 0
Manufacturer: Illegal Manufacturer code
Blocks total: 335100 Blocks current: 335100 Blocks remaining: 38547
RBlocks total: 353448 RBlocks current: 353448 RBlocks remaining: 56895
Starting to write CD/DVD at speed 2 in dummy mode for single session.
Sending CUE sheet...
/usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Track 01: 0 of 49 MB written.CDB: 2A 00 00 00 00 36 00 00 1B 00
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (not valid)
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
status: 0x2 (CHECK CONDITION)
write track data: error after 127008 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Writing time: 85.450s
/usr/bin/cdrecord: fifo had 66 puts and 3 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 1 times full, min fill was 96%.
--------------
>From cat /etc/fstab
....
/mnt/cdrom /mnt/cdrom supermount fs=iso9660,dev=/dev/cdrom 0 0
/mnt/cdrom2 /mnt/cdrom2 supermount fs=iso9660,dev=/dev/cdrom2 0 0
....
--------------
[root@xxxxxxxxx# ls -al /dev/cdr*
lrwxrwxrwx 1 root root 3 Nov 10 23:25 /dev/cdrom -> hdb
lrwxrwxrwx 1 root root 8 Nov 10 15:27 /dev/cdrom1 -> /dev/scd0
lrwxrwxrwx 1 root root 4 Nov 10 23:25 /dev/cdrom2 -> hdd
--------------
Just for those who've said that using cdreord from the command line will
magically make it work....
[root@xxxxxxxxxxx# /usr/bin/cdrecord -v -eject -pad speed=4 dev=0,0,0 -dao
-audio -swab /extra/track1.wav/ extra/track2.wav
Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
TOC Type: 0 = CD-DA
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 2.1.39
Using libscg version 'schily-0.1'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'LG '
Identifikation : 'CD-RW CED-8080B '
Revision : '1.05'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
FIFO size : 4194304 = 4096 KB
Track 01: audio 49 MB (04:56.98) no preemp
Track 02: audio 47 MB (04:41.97) no preemp
Total size: 97 MB (09:38.96) = 43422 sectors
Lout start: 97 MB (09:40/72) = 43422 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in: -11625 (97:27/00)
ATIP start of lead out: 335100 (74:30/00)
speed low: 0 speed high: 4
power mult factor: 5 6
recommended erase/write power: 3
Disk type: Phase change
Manuf. index: 0
Manufacturer: Illegal Manufacturer code
Blocks total: 335100 Blocks current: 335100 Blocks remaining: 291678
RBlocks total: 353448 RBlocks current: 353448 RBlocks remaining: 310026
Starting to write CD/DVD at speed 2 in write mode for single session.
Last chance to quit, starting real write in 1 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
/usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01: 3 of 49 MB written (fifo 93%)./usr/bin/cdrecord: Input/output
error. write_g1: scsi sendcmd: retryable error
CDB: 2A 00 00 00 06 54 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (not valid)
write track data: error after 3810240 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Writing time: 103.380s
Fixating...
Fixating time: 0.001s
/usr/bin/cdrecord: fifo had 124 puts and 61 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 28 times full, min fill was
92%.
--
CYA,
Muzza.
Mandrake Linux 7.2
Current Linux uptime: 2 days 4 hours 17 minutes.
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
