I have a 90 mhz pentium with Mandrake 7.2, and have both an HP CDWRiter
Plus 7200 and a Memorex CRW-1622.  I get a similar failure from both cd
writers.  I first used xcdroast, then went to cdrecord directly to capture
the problem.  This problem occurs either using dummy or real write, and
even in stand alone console mode.

  I basically get xx meg of data recorded, then an error:
Can someone give me a clue?

bug

printout:

[root@dell /root]# cdrecord -v -dummy speed=2 -dev=0,0 Mandrake72-ext.iso
Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jrg
Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 2.1.39
Using libscg version 'schily-0.1'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'Memorex '
Identifikation : 'CRW-1622        '
Revision       : 'D2.3'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO
Drive buf size : 786432 = 768 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  552 MB
Total size:     634 MB (62:51.38) = 282854 sectors
Lout start:     634 MB (62:53/29) = 282854 sectors
Current Secsize: 2048
  ATIP start of lead in:  -11640 (97:26/60)
  ATIP start of lead out: 337350 (75:00/00)
Disk type:    Long strategy type (Cyanine, AZO or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 337350 Blocks current: 337350 Blocks remaining: 54496
RBlocks total: 349030 RBlocks current: 349030 RBlocks remaining: 66176
Starting to write CD/DVD at speed 2 in dummy mode for single session.
Last chance to quit, starting dummy write in 1 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Track 01:   4 of 552 MB written (fifo  98%).cdrecord: Input/output error.
write_g1: scsi sendcmd: retryable error
CDB:  2A 00 00 00 08 1D 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 05 00 00 00 00 0A 00 10 9A F8 21 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x00 (logical block address out of range) Fru 0x0
Sense flags: Blk 0 (valid)
 
write track data: error after 4253696 bytes
Sense Bytes: F0 00 00 00 00 00 00 0A 00 10 9F B4 00 00 00 00 00 00
Writing  time:   24.835s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
cdrecord: fifo had 131 puts and 68 gets.
cdrecord: fifo was 0 times empty and 59 times full, min fill was 93%.
[root@dell /root]#                         


Reply via email to