Been there, done that..
You can get the driver you need from Linksys and compile it in.
Let me know if you need any help.
TC
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Wayne Stout
> Sent: Wednesday, April 11, 2001 9:37 AM
> To: [EMAIL PROTECTED]
> Subject: Re: [expert] Installation - Unsupported ethercard?
>
>
> I have a Linksys card as well, and 7.2 intaller never recognized it.
> What I ended up having to do was set my old faithful ISA 3com card as
> eth0, then head out to Scyld's website and download the latest netdriver
> src.rpm. After building and installing the drivers, everything works
> just fine.
>
> Interestingly enough, the 8.0 beta2 actually detects the card and
> configures it properly. Unfortunately, it sees the PCI card before the
> ISA and sets everything up backwards. Nothing a quick little tweak to
> /etc/modules.conf couldn't fix, though.
>
> http://www.scyld.com/network/tulip.html
>
> HTH,
>
> Wayne
>
> "Matthew O. Persico" wrote:
> >
> > I have a LinkSys LNE100TX Ethernet Card. It is not on the list of cards
> > in the install of 7.2. It does, however, have drivers available. It is
> > also a descendant of the DECchip Tulip(dc21x4x) card.
> >
> > Does this sound workable?
>
>
